634674

Mc crypt DJ-20 Manual

37
Zoom out
Zoom in
Previous page
1/81
Next page
37
Start-Up
Volume Control
• Set the volume of the connected amplier to minimum.
• Set the channel faders (3, 5 and 7) to minimum as well.
• Start a connected playback device, e.g. a CD player. If this device has a volume control, set the volume to about
75% of the maximum level.
• Slide the respective channel fader (3, 5 or 7) upwards to set the maximum volume of the respective channel. The
signal level can now be read from the level display (9). It should not exceed „0“ dB.
• Set the desired volume for the remaining mixing desk channels the same way. All channels should have about the
same volume when cross-fading between the channels so that there are no great differences in the volume which
would otherwise require the output signal to be adjusted.
• Now set the desired volume using the volume control on the amplier. Make sure that the sound is not distorted.
• After you have made these settings, use only the LEVEL control of the amplier when you want to change the
playback volume.
Make sure that the connected speakers and the amplier are not overloaded. The sound should
never be distorted.
If there are any distorted music signals even though the volume on the amplier has not been
set too high and the mixer has been set correctly, switch off the mixer immediately and check the
connection. If the connection is correct, please contact a specialist.
Using Headphones
Before plugging the headphones in or out, putting them on or turning the mixing desk on or off,
please turn the headphone volume controls (17) to the left stop („00“ position)! There is a risk of
damage to your hearing through excessive volume at the headphones output.
• The signal of the mixing desk output is given out through the headphones output.
• The volume can be set with the volume control for headphones (17).
Cross-�ading/Mixing
• You can use the crossfader (18) to cross-fade/mix the signals of channels 1 and 2.
• When the crossfader (18) is activated, one channel is faded out while the other channel is faded in. In centre
position, both fader channels are played equally.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt DJ-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt DJ-20 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info