This control is used to set the volume ratio between microphones 1 and 2.
(2) MIC LEVEL control
This control is used to set the volumes of microphones 1 and 2.
(3) Channel fader CHANNEL 1
Use the channel fader for adjusting the level of channel 1.
Slide control to the bottom position = minimum channel level
Slide control to the top position = maximum channel level
Channel faders for channels that are not in use should be turned down. This reduces the possibility of
interference.
(4) INPUT SELECTOR CHANNEL 1 switch
This switch species whether a line device or a record player is connected at channel 1.
LN position > a line device (CD player, cassette deck etc.) is connected to the CHANNEL 1 input so-
ckets.
PH position > a record player (with magnetic system) is connected to the CHANNEL 1 input sockets.
Alwaysplacetheswitchinthepositionintendedforthedeviceyouhaveconnected.�ailuretoAlways place the switch in the position intended for the device you have connected. �ailure to
do so results in distortion, which could damage the mixer and the connected devices.
(5) Channel fader CHANNEL 2
Use the channel fader for adjusting the level of channel 2.
Slide control to the bottom position = minimum channel level
Slide control to the top position = maximum channel level
Channel faders for channels that are not in use should be turned down. This reduces the possibility of
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Mc crypt DJ-20 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Mc crypt DJ-20 in the language / languages: English, German, Dutch, French as an attachment in your email.
The manual is 0,98 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.