Manual MB Quart raa 4200 (page 8 of 76) (English, German, French, Italian, Spanish)

166347

Zoom out

Zoom in

1/76

INST

ALLATION

8. Securely mount the amplifier to the vehicle or amp rack. Be careful not to mount the amplifier on

cardboard or plastic panels. Doing so may enable the screws to pull out from the panel due to road

vibration or sudden vehicle stops.

9. Connect source signal by plugging the RCA cables into the input jacks at the amplifier.

CAUTION: Always ensure power is off or disconnected at the amplifier before connecting

RCA cables. Failure to do so may cause injury, damage to the amplifier and/or

connected components.

10. Connect the speakers. Strip the speaker wires 1/2" and insert into the speaker plug connector and tighten

the set screw to secure into place. Be sure to maintain proper speaker polarity. DO NOT chassis ground

any of the speaker leads as unstable operation may result.

11. Perform a final check of the completed system wiring to ensure that all connections are accurate. Check

all power and ground connections for frayed wires and loose connections which could cause problems.

12. Ensure the amplifier is mounted securely and reinstall the end cover. Install an inline fuse near the

battery connection.

NOTE: Follow the diagrams for proper signal polarity.

CAUTION: These amplifiers are not recommended for impedance loads below 2 stereo

and 4 bridged.

CAUTION: Do not attempt to connect the source units speaker leads directly to the RCA

connections of this amplifier, as damage to the source unit and/or the

amplifier may result.

2-Channel Wiring

• RCA Inputs connect to FRONT inputs only.

• 2/4 CH SWITCH push in to set to 2CH.

• Gain (Front & Rear) - is set independently to

suit application.

• Crossover (Front & Rear) - is set independently

to suit application.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MB Quart raa 4200 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MB Quart raa 4200 Manual

Product: