Manual MB Quart pab 1200 1 d (page 11 of 88) (English, German, French, Spanish)

168654

Zoom out

Zoom in

1/88

English

MBQR-1

5 channel discrete,

one being mono low pass

You can use this conﬁ guration simply as 4 discrete full range chan-

nels, with a 5th low pass channel. All of the crossovers are bypassed,

except the LOW PASS on channel 5. The 5 channels can also be uti-

lized with an outboard active crossover, or with crossovers in head

units or equalizers.

Interconnect cable checklist:

Connect channel 1&2 inputs to the front output, channels 3&4 to the

rear output, and channel 5 to the mono subwoofer output of a head

unit or in dash equalizer. The LOW PASS ﬁ lter on channel 5 will be

in tandem with that of the source. You can either set it to the same

frequency for a steeper rolloff, or set it to a higher frequency to mi-

nimize it’s effect. By the same reasoning, you could switch channels

1,2,3&4 high pass crossovers in for steeper high pass slopes.

Switch setting checklist:

- INPUT MODE: 5CH DISCRETE

- CH 1/2 X-OVER: FULL

- CH 3/4 X-OVER: FULL

Crossover frequency control checklist:

- CH 1/2 HIGH PASS: N/A

- CH 3/4 HIGH PASS: N/A

- CH 3/4 LOW PASS: N/A

- CH 5 LOW PASS: 100 Hz

Please note that these frequency points are suggestions only. Refer to

the loudspeaker manufacturer speciﬁ cations and the section “Setting

up systems after installation for best performance”

Level control checklist:

Refer to the section “Setting up systems after installation for best

performance”

Minimum ﬁ nal loudspeaker impedances:

2 ohm per channel

MBQR-1

3 or 4 channel discrete,

one being mono low pass

We will use the same basic setup as above to illustrate a 3 channel

arrangement, by mono bridging the stereo channel pairs 1&2, 3&4.

For a 4 channel setup, mono bridge only one set.

Interconnect cable checklist:

- Use 2 Y-adapters RCA cables, one for channels 1&2, and the second

for channels 3&4, to create 2 inputs for channels 1,2,3&4 only, as

shown.

- Connect the positive terminal of channels 1&2 mono speaker to

channel 1+, and its negative terminal to channel 2-. Connect the

positive terminal of channels 3&4 mono speaker to channel 3+, and

its negative terminal to channel 4-.

- Channel 5 is a true single channel, and as such is not bridgeable.

Minimum ﬁ nal loudspeaker impedances:

- 2 ohm per channel in stereo mode

- 4 ohm per mono bridged pair

- 2 ohm on channel 5

AMPLIFIER APPLICATIONS

PAB 5400 5-Channel Ampliﬁ er

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MB Quart pab 1200 1 d in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 11,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MB Quart pab 1200 1 d Manual

Product: