346835
12
Zoom out
Zoom in
Previous page
1/28
Next page
FreshFoodFeotures
Door Storage
Beverage ChillerTM/MiniChiller TM
(select models)
The Beverage Chiller TM and
MiniChiller TM keep beverages and
other items colder than the rest of
the fresh food compartment. An air
inlet directs air from the freezer into
the chiller(s).
Controls
The chiller control is located on the left
side wall of the fresh food compartment.
Turn the control clockwise for colder
tern peratu re.
To Remove Chiller(s):
Unload the chiller(s).
Slide the assembly up and pull straight out.
Note: If the chiller is installed directly under the
dairy center or a door bucket, the bucket or dairy
center will need to be removed before removing the
chiller.
To Install Chiller(s)
Align one of the air inlet holes with the hole cut out
on the door.
Slide the assembly in and down so that the hooks
are firmly seated on the door liner.
I Note: The chillers will not operate properly if the
air intake hole is not aligned with the control
location.
Dairy Center
The Dairy Center provides convenient
door storage for spreadable items
such as butter and margarine. This
compartment can be moved to
several different locations to
accommodate storage needs.
To Remove:
Slide dairy center up and pull out.
To Install:
Slide assembly in and down so that the hooks are
firmly seated on the door liner.
To Remove Dairy Door:
Press in sides of dairy door and pull out.
To Install Dairy Door:
Slide sides of dairy door inside dairy center until
hinge points snap into place.
Adjustable Deep Tilt-Out Door Buckets
(select models)
The Adjustable Deep Tilt-Out Door Bucket provides
easy access to food items stored in the door.
To Remove Bucket:
Tilt bucket out.
Pull straight out of the bracket.
To Install Bucket:
Tilt the front of the bucket down slightly.
Slide into bracket and tip upright.
To Move Bucket Frame to Another Location:
Remove bucket.
Lift bracket up and pull straight
out.
Place the bracket in a new location.
Door Buckets
Door Buckets can be moved to meet individual storage
needs.
To Remove:
Lift bucket up and pull straight out.
To Install:
Place bucket in desired door liner
retainer, push down until bucket stops.
11
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maytag gc2227 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maytag gc2227 in the language / languages: English as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info