778523

MaxxGarden 21028 Manual

41
Zoom out
Zoom in
Previous page
1/50
Next page
Operation Instruction
• Install the heater according to the following steps.
1. Open the outer carton, remove all the packing materials (including heating lamp shaking
protection packing), then check if everything is OK for the heating mould, heater stand
mould, wire cable and plug.
2. Take out of the heating mould, heater stand mould, heater stand base, screws and
assembling tools.
3. Connect the two curved poles. see Fig.1 then put 3 pcs M6X8 in the corresponding holes,
tight them by tools. Please pay attention that Do not damage the wire cable during
the assembling.
4. Connect the curved pole to the straight pole. see Fig. 2 then put 3 pcs M6X8 in the
corresponding holes, tight them by tools. Please pay attention that Do not damage the
wire cable during the assembling.
5. Connect the whole poles to the round base with 4 pcs M8x8 screws. See Fig.3
6. Connect the round based to the ground by expansion screws. See Fig.4
7. Connect the heating mould to the heater stand mould by M8X50 and 2pcs M8X10 screws.
Connecttheeasyttingplugdevicesbetweentheheatingmouldandheaterstandmould
and tight them. see Fig.5.
8. Turn on the switch and connect the power, to check if the heater can work well.
9. Don’t move,cover or climb the heater while it is working. See Fig.6.
• Pay attention to the mounting place and all mounting material(dowels, screws). Ensure they
are suitable and stable enough for mounting and lastingly holding of the appliance.
• Pay attention that, the installation of the appliance must not add excessive wind load.
• Adjust the desired angle of radiation and fest screw all screws. Check regularly the screw’s
connection. Mechanical bearing pressure and oscillation due to wind or rain could lead to
loose.
• Plug in the power source and operate the remote control. Then observe, whether during
therst10-15minutestheapplianceworkstrouble-free.
• If you do not use,please remove battery socket.
FIGURE 1
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MaxxGarden 21028 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MaxxGarden 21028 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info