629528

Maxview VUQUBE MXL005 Manual

6
Zoom out
Zoom in
Previous page
1/6
Next page
UK
To align the satellite dish to the Astra 2 satellite, use the SIGNAL TEST menu built into the SKY® digibox. To access this
menu you will first have to press the SERVICES button on the remote control. In the SERVICES menu you will then need to
access the SYSTEM SET UP (number 4) and the SIGNAL TEST (number 6).
The display will then show, from top to bottom: SIGNAL STRENGTH - SIGNAL QUALITY - LOCK INDICATOR - NETWORK ID -TRANSPORT STREAM.
You will need to adjust the dish until there is at least a quarter of the SIGNAL QUALITY bar displayed, the LOCK INDICATOR shows OK and the
NETWORK ID is displaying 0002. If the NETWORK ID is showing any other details, you have locked onto the wrong satellite and will need to
re-align the dish. When Astra 2 North Beam is being received the TRANSPORT STREAM will display 07d4. This is not the case if receiving South
Beam. Press BACK UP.
For free to air or freesat® receiver installation information please refer to operating manuals.
GUIDELINES FOR SKY® DIGITAL SATELLITE RECEPTION
CARE & MAINTENANCE.
PFLEGE UND WARTUNG.
UK
The VuQube has been designed to be maintenance and trouble free. For optimum signal strength, keep the cover clean from dirt, bugs, and
other debris. Periodic washing of the top cover with mild soap and water is recommended.
DO NOT USE SOLVENTS TO CLEAN VUQUBE. DO NOT DROP OR EXPOSE TO JARRING MOVEMENTS.
D
Die VuQube ist so konstruiert das Sie keine besondere Pflege und Wartung benötigt. Um immer ein optimales Signal zu erhalten empfiehlt es
sich das Gehäuse sauber zu halten. Verwenden Sie hierfür nur einen feuchten Lappen.
Verwenden Sie keine Lackverdünnung oder ähnliches. Bewegen Sie die Sat-Antenne während das Suchvorganges nicht. Da dann, der Satellit
nicht gefunden wird.
UK
IMPORTANT
4. You must watch the TV for signal strength while rotating the antenna in step 4. See your Set Top Box owner’s
manual to determine how to display the satellite signal strength screen on your TV.
When pressing the left and right arrows, the remote will continuously beep with a short pause in between: beep - beep - beep…
If the unit reaches its rotational limit in either direction, the remote will display REVERSE DIRECTION and beep rapidly:
beep beep beep... Press other arrow to reverse rotation.
4. Watch the signal strength screen on the TV. Use the LEFT and RIGHT arrows to rotate the antenna from east
to south and watch for signal strength to appear on the screen.
5. When signal strength appears, stop rotating the antenna. Tap the up, down, left and right arrows as
necessary to maximize the satellite signal.
6. Press POWER until the remote turns off (approximately 1 second). The remote turns off automatically if
no buttons are touched for 30 seconds.
7. Exit the signal strength screen to view your programming. Enjoy!
Note: If you move the VuQube you will have to re-adjust for the satellite. Follow the directions on pages 5-6.
D
Wichtig !!: Schalten Sie den Sat-Finder in Ihrem Receiver ein. Während sich die Antenne dreht beobachten Sie bitte die Signalstärke
und Signalqualität auf Ihrem Bildschirm.
Wenn Sie nun die rechte oder die linke Pfeiltaste drücken um die Suche zu starten ertönen zwei Beeps mit einer Pause dazwischen :
beep - beep - beep...
Wenn sie Sat-Antenne ihr Drehlimit erreicht hat und nichts gefunden wurde erschein im Display der Fernbedienung REVERS
DIRECTION und die Fernbedienung beept andauernd. Drücken Sie nun auf die andere Pfeiltaste um die Drehrichtung zu ändern.
4. Beobachten Sie das Signalmeter auf Ihrem TV-Bildschirm
5. Wenn das Signal erscheint Stoppen Sie die Antenne. Drücken Sie die Tasten “UP“, “DOWN“, “LEFT“ und “RIGHT“ um das Signal zu optimieren
und um den höchsten Wert bei der Signalqualität zu erreichen.
6. Drücken Sie nun auf die Taste “POWER“ solange bis sich die Fernbedienung ausschaltet (ungefähr 2 sek.) Die Fernbedienung schaltet sich
automatisch ab wenn Sie 30 Sek. keine Taste drücken.
7. Verlassen Sie nun den Sat-Finder in Ihrem Receivermenü und genießen Sie das Programm.
Achtung !!: Wenn die VuQube bewegt wird ist der Einstellvorgang zu wiederholen.
UK
The VuQube can be secured to an object
using a padlock and cable.
D
An die VuQube kann zur Diebstahlsicherung
ein Vorhängeschloss angebracht werden (siehe
Zeichnung).
SECURITY BRACKET.
DIEBSTAHLSICHERUNG.
Page/Seite 6 Page/Seite 7
6


Need help? Post your question in this forum.

Forumrules
1

Forum

maxview-vuqube-mxl005

Reset search

  • Hallo, wir haben unseren maxiview aufgebaut und eingestellt. Plötzlich kein Empfang mehr und nach ein- und ausschalten blinkt am Steuergerät die error Taste. Was kann man tun? Submitted on 31-7-2022 at 18:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview VUQUBE MXL005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview VUQUBE MXL005 in the language / languages: English, German as an attachment in your email.

The manual is 10,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info