Manual Maxview Precision MXL012-55TWIN (page 14 of 24) (English, German)

629524

Zoom out

Zoom in

1/24

GUIDELINES FOR SKY™ SATELLITE RECEPTION

To align the dish to Astra 2 using the sky receiver, use the SIGNAL TEST menu built into the SKY™

digibox. To access this menu:

Press the SERVICES button on the remote control. Enter SYSTEM SETUP (number 4).

Enter SIGNAL TEST (number 6). The display will then show, from top to bottom:

SIGNAL STRENGTH - SIGNAL QUALITY- LOCK INDICATOR - NETWORK ID - TRANSPORT STREAM.

You will need to adjust the dish until there is at least a quarter of the SIGNAL QUALITY bar display,

the LOCK INDICATOR shows OK and the NETWORK ID is displaying 0002. If the NETWORK ID is

showing any other details, you have locked onto the wrong satellite and will need to re-align the dish.

Press BACK Up to exit menu’s.

SKY is a registered Trademark

CONNECTING YOUR PRECISION SYSTEM

ANSCHLUSS SCHEMA

LNB 1

Power

Steckdose

Main TV

Fernsehgerät

Scart or HDMI cable

Scart oder HDMI-Kabel

A. Single LNB

B. Twin LNB - Only available on models MXL012/65TWIN & MXL012/55TWIN.

Twin-LNB – Nur bei den Modellen 40043 und 40045 vorhanden.

Note: A twin LNB system can also be connected to 2 receivers. Or 2 TV’s with in-built sat tuners.

Satellite Receiver/Satelliten-Receiver

SIGNAL STRENGTH METER ON SKY™ BOX

For SKY™ box users only: Outside of the UK, problems of reception and aligning the dish can start to

occur. The default frequency of the SKY™ ‘Digi box’ is set to a transponder on the North beam.

As you travel south and move out of the north footprint, you may need to change the default

transponder of the ‘Digi box’ to match the South beam.

To change the default transponder setting you will ﬁrst need to access the hidden ‘INSTALLER SETUP’

menu. Then press the ’SERVICES’ button on your SKY™ remote and then ‘4’ to access ‘SYSTEM SETUP’.

Although it is not displayed, you will need to press ‘0’ then ‘1’ then ‘SELECT’ to access the ‘INSTALLER

SET UP’ menu, then ‘2’ to enter ‘DEFAULT TRANSPONDER’. The display will then show, from top to

bottom: Frequency, Polarisation, Symbol Rate, FEC and Save New Settings. Select ‘FREQUENCY’ and

by typing in the relevant numbers, change the settings from ‘11.778’ to ‘12050’. Using the arrow keys,

change the settings to 27.5, 2/3, vertical (V). When the changes have been made you will then need to

‘SAVE NEW SETTINGS’. Press ‘BACK UP’ to return to main screen. Note this information is subject to

change check our website for any possible updates.

LNB 2

PRECISION INSTRUCTIONS MASTER2.indd 14 26/06/2013 12:45

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxview Precision MXL012-55TWIN in the language / languages: English, German as an attachment in your email.

The manual is 5,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxview Precision MXL012-55TWIN Manual

Product: