629538
8
Zoom out
Zoom in
Previous page
1/14
Next page
8
Installation
Required Tools & Equipment (not supplied)
Drill Set
Power Drill
No.2 Phillips screwdriver
Weather Resistant Elastic Adhesive* and Applicator gun
Surface Cleaner
Deburrer/Round File/Emery paper
Conduit (recommended method for securing cables)
*Maxview recommends the following adhesives:
Sikaflex®-512 Caravan
Geocel® Geobond HM
Sikaflex®-252
Selecting an Installation Location
Positioning Antenna Unit
Decide where you wish to mount your Dome Antenna, taking into account any obstacles that
might interfere with the tracking of the satellite such as roof lights & vents. It is
recommended that you do a dry run to find the best position.
Check for electrical cables beneath screw fixing points.
Check cables will reach the Control Box
The installation surface should be smooth, flat and rigid.
Before starting the installation of the antenna, make sure that the surface on which the
antenna is to be mounted is dry and clean.
Positioning Control Box
Site the Control Box in a convenient location where:
Rear connections are accessible.
Cables can be routed and concealed neatly.
There is an electrical supply of 12-24v dc permanent.
There is adequate ventilation.
Material construction and thickness is suitable for fixings.
Installation on the Vehicle
Position the Maxview Dome on top of the vehicle carefully in your chosen location. The ‘F’
connector should be directed to the rear of the vehicle.
Follow the adhesive manufacturer’s guidelines for surface preparation.
Apply the adhesive to the underside of each fixing area. Drill and fix screws provided,
ensuring the system is level and there is no distortion to the base of the system. We always
recommend using screws and adhesive for fixing.
We recommend you follow the adhesive manufacturer’s guidelines for curing time before
driving your vehicle.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL007 Max-Dome at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL007 Max-Dome in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info