629532
5
Zoom out
Zoom in
Previous page
1/34
Next page
5
Safety Precautions
Read this manual carefully and become familiar with your satellite antenna. Understand its
applications, its limitations and any hazards involved. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury. Maxview declines all
responsibility in the event of incident or accident if they are due to a non observation of the
installation instructions or the way the product is used.
No modifications are permissible to the Antenna Unit, Control Box or Control Panel.
Installation
Installation should be carried out by a competent person.
Take care when working at heights keeping work area clean and tidy to avoid trip
hazards.
Use creeper boards where necessary to ensure roof construction can support your
weight.
Use a recommended adhesive from page 10 to bond the antenna unit to vehicle roof
and follow the manufacturer’s instructions during application.
Do not travel until adhesive has cured noting that curing times vary with weather
conditions
Power tools should be used in accordance with manufacturer’s instructions
All electrical work should be carried out by a competent person. If in doubt seek
advice from a qualified electrician.
The Control Box and Control Panel are for internal use only and are not waterproof.
Operation
Before starting your journey check that antenna is in the park position.
The maximum speed of vehicle with antenna mounted on roof is 81mph (130km/h).
Never operate the antenna if someone is in close proximity of the antenna.
Disconnect power to the antenna before installation or adjusting LNB skew angle.
If high winds or electrical storms are anticipated lower antenna to park position.
Maintain adequate ventilation around the Control Box to avoid overheating.
Do not allow children to operate the antenna unit.
Dispose batteries responsibly.
Remove Control Box fuse before accessing the roof space around the antenna unit.
Do not operate the Seeker Wireless with snow or ice on the antenna.
Servicing
If in the event that you do experience a problem with the system call Maxview
Customer Service +44 (0)1553 811000.
Any inspection or repair must be carried out by Maxview or an appointed
representative of the manufacturer.
No regular maintenance required on the system.
Do not remove cover on Antenna, Control Box or Control Panel.
Do not use solvent or abrasive cleaning agents on the system.
Use a soft damp cloth to clean the Control Box and Control Panel
Use a suitable mild detergent to clean the Antenna Unit.
Do not pressure wash the Antenna Unit.
Check the Antenna Unit fixings for mechanical integrity at least once a year
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL003 Seeker Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL003 Seeker Wireless in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info