810352
127
Zoom out
Zoom in
Previous page
1/194
Next page
Starting and Driving
125
2
Set Cruise Control
If the cruise control stays on when you do not use
it, you may touch the button and accidentally enter
the cruise state. Then you may get scared and lose
control of the vehicle. Therefore, keep the cruise control
switch "Off" until you need to use the cruise function.
The cruise control buttons are located on the steering wheel.
: Cruise on/off switch. Press this button to turn on/off the
cruise control system. Meanwhile the "cruise indicator lamp" in
the instrument cluster will illuminate/go off correspondingly.
: Cruise cancel switch. Press this button to cancel the
cruise function without clearing the set speed in the memory.
RES/+: Cruise resume/acceleration switch. To store the set
speed, move the thumbwheel upwards to recover this speed.
Move the thumbwheel again to accelerate (1km/h per time).
The instrument cluster will display the corresponding target
speed.
SET/-: Cruise setting/deceleration switch. Move the
thumbwheel downwards to set the speed. Then the cruise
function will be enabled and the cruise indicator lamp in the
instrument cluster will turn green from white. If the cruise
function is enabled at this time, move the thumbwheel
downwards to lower the cruise speed (1km/h per time). The
instrument cluster will display the corresponding target speed.
Set Speed:
1Press to turn on the cruise control system.
Meanwhile the "cruise indicator lamp (white)" in the
instrument cluster will illuminate.
2Accelerate to the speed required.
Note:This speed must be higher than 40km/h.
3Move the thumbwheel towards SET/- direction downwards
and then release it. Then the current speed will be stored
and maintained. The speed set will appear in the
instrument cluster display momently, and the "cruise
indicator lamp" on the instrument cluster will turn green
from white.
4Release the accelerator pedal, and then the vehicle will
run at the speed set steadily. The cruise control function
will be disabled when the brake is enabled.
Resume Set Speed
If you have set the cruise speed of cruise control system, the
cruise control function will be disabled when you depress the
brake pedal or press , but this set speed in the memory
will not be cleared. To resume the pre-set speed, move RES/+
thumbwheel upwards when the vehicle speed reaches 40km/h
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxus V80-RH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxus V80-RH in the language / languages: English as an attachment in your email.

The manual is 22.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info