810352
108
Zoom out
Zoom in
Previous page
1/194
Next page
Starting and Driving
106
Instructions for diesel vehicles with DPF
DPF (Diesel Particulate Filter) is mainly used to collect
particulates in vehicle exhaust, and within a certain period,
active and triggered regeneration will be performed for the
DPF to clear up particulates collected in it, so that its functions
are restored. The active regeneration refers to the engines
automatic start of self-recovery of DPF function of collecting
particulates in vehicle exhaust according to the actual working
condition. The triggered regeneration refers to the
regeneration under human intervention on the fact that the
present working condition of the engine cannot meet the
conditions for active regeneration.
Alarms and warnings on the instrument (for vehicles
equipped with this feature)
Level 1 Alarm: The instrument information centre displays
icon for 3 seconds and the buzzer beeps three times.
Level 2 Alarm: The instrument information center
displays icon for 3 seconds and the buzzer beeps
three times. Moreover, the two types of warnings cycle every 2
minutes.
Perform DPF regeneration as per the alarms and warnings on
the instrument after noticing the warning signals. If Level 1
Alarm occurs, DPF regeneration can be performed through
high-load drives or a triggered regeneration. If Level 2 Alarm
occurs, only triggered regeneration is applicable. Ignoring of
the warnings will lead to continuously increased particulates in
the DPF, resulting in its failure to regenerate. Please go to the
Service Dealer for servicing.
Procedures of triggered regeneration (for vehicles
equipped with this feature)
1When the engine coolant temperature exceeds the first
scale line, stop the vehicle, put the shift lever in N gear,
apply the parking brake and turn the ignition key to OFF
position for 2 minutes.
2Turn the ignition key to ON position but do not start the
engine.
3Fully depress the brake pedal and release the parking
brake.
4Turn off the ignition switch and turn it on again for three
times, and finally maintain the ignition switch in ON
position.
5For MT models: fully depress the brake pedal and the
clutch pedal with feet, start the engine and then release
both pedals, thus the regeneration starts. For AMT
models: fully depress the brake pedal, start the engine and
then release the brake pedal, the regeneration starts.
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxus V80-RH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxus V80-RH in the language / languages: English as an attachment in your email.

The manual is 22.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info