785086
33
Zoom out
Zoom in
Previous page
1/35
Next page
33
The machine must be connected by a certified electrician. A 1x16A fuse and 30mA
current leakage fuse should be used at a maximum height of 170cm for the 230v
machine. For the 400v machine you should use a 3x16A fuse.
The protective film on the machine must be removed first after installing the
machine.
The power supply cable (5x2.5 mm2 H07 RNF), water supply connection (3/4) and
water drain hose come with the machine
Where the machine is installed, at a height of 25/75cm there should be a ½ water
supply with ¾ valve for the fresh water inlet of the machine. At a height of about
2cm there should be a drain pipe in the wall or ground where the machine is placed.
When using the VN500 Ultra this may be put higher (Max 70CM).
A ventilation system with cooker hood should be present where the machine is
installed. The user must ensure that the control and electricity in the machine
remains free from moisture, condensation and vapour.
The leveling feet are height-adjustable. They should be adjusted according to the
ground floor and entry and exit stands, allowing the machine to operate in a leveled
position.
The manufacturer will not take responsibility for any damage or problems to the
machine or other machines, caused by other machines that are connected to the
same power board, supplying power to the machine. For this reason we advise you
to use a separate group/board for the machine.
Troubleshooting
1. Is the power supply connected properly and are the cables still good and not worn?
2. Does the machine have power? Is the fuse undamaged?
3. Is the cover closed properly?
4. Is the waterhose still connected to the valve and the machine? Is the water valve
opened? Is the hose still good and not worn?
5. Are the detergent and/or rinsing pumps still working and is there still enough in the
supply cans?
6. Are the detergent and rinsing hoses placed in the cans properly? And is there still
enough in both supply cans?
The earth installation for the power supply work, must be constructed
complying with the effective grounding regulations and must be evidenced
by certificates issued by relevant authorities. The service personnel who will
install the machine need to ground the machine with a cable connected to
the power supply, and connected to thegrounding end of the machine cable.
Only after this is done the water connections should be done and then the
machine can be operated. Make sure that all safety regulations are taken
into account while installing the machine. The manufacturer/importer and
dealer will not be responsible for any injuries, damage or other
consequences caused by not following the safety regulations.
Caution: Do not start or use the machine without connecting it to the
earth cable first.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxima VN-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxima VN-500 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info