481387
8
Zoom out
Zoom in
Previous page
1/16
Next page
In AUTO mode,the indicator default temperature is 24 .
AUTO mode operation procedure
Operates by selecting automatically the operation mode(HEAT,DRY,COOL)depending on the room temperature at starting.
With the remote controller pointing towards the air conditioner.With the remote controller pointing towards the air conditioner.
Press the ON/OFF button.
1
When the unit is not at AUTO mode:When the unit is not at AUTO mode:
2
Press the MODE select button.
Move the MODE to the (AUTO)position.
To Stop:
Press the ON/OFF button.
The operation of the AUTO
mode can be performed by
only pressing the ON/OFF
button from the next time.
Air is not blown out at during opera-
tion.
NOTE
If you don't like the content of AUTO mode operation,
change to HEAT,DRY or COOL than AUTO.
If you don't like the content of AUTO mode operation,
change to HEAT,DRY or COOL than AUTO.
Temperature adjusting procedure during AUTO operation
Air temperature adjustment is possible even during automatic operation.There are 6 levels of adjustment possible with
the button or the button .
Press the or button.
1
When the button or the button is pushed ,the indicator does not change.
ON/OFF
CLOCK
RESET
HR.
MIN.
6
Power cord is to be selected according to national regulations.
Outdoor unit power cord should be selected and connected according to the outdoor unit
installation manual.
Wiring should be away from high temperature components, or the insulation layer of the
wires may melt down.
Use wire clamp to fix the wires and terminal block after connection.
Control wire should be wrapped together with heat insulated refrigerant pipes.
Connect the indoor unit to power only after the refrigerant has been vacuumed.
CAUTION
Don t connect the power wire to the signal wire connection end.
Indoor/Outdoor Unit Signal Wire
Connect the wire according to their numbers.
Wrong connection may cause malfunction .
Wiring Connection
Seal the wiring connection with the insulation material , or the condensing dew will be caused.
Wiring specifications are listed below, insufficient capacity would over-heat the wire or destroy
the machine.
23
24000Btu/h 36000Btu/h SIGNAL WIRING DIAGRAM
24000Btu/h 36000Btu/h 42000Btu/h, 48000Btu/h SIGNAL WIRING DIAGRAM
*
ON/OFF
CLOCK
RESET
HR.
MIN.
2
1
18000Btu/h SIGNAL WIRING DIAGRAM
12000Btu/h SIGNAL WIRING DIAGRAM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxicool CTL35H4A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxicool CTL35H4A in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info