450922

Maxi-Cosi Easy Base 2 Manual

7
Zoom out
Zoom in
Previous page
1/82
Next page
GB
English
Checklist …
To ensure the optimum safety of your child, check the following after installation:
• The seat belt is as tight as possible and not twisted.
• The two belt parts pass through the belt openings in the base and under the blue belt clamp.
• The support leg is fully folded out.
• The indicator on the base of the support leg is green.
• The entire Maxi-Cosi EasyBase 2 is installed securely and firmly in the car (check by pulling on the
Maxi-Cosi EasyBase 2).
C. Removing the Maxi-Cosi EasyBase 2
• Restore the support leg to its start position by pressing the control button (8,1) and sliding the support
leg upwards (8,2).
• Loosen the seat belt (9,1) and open the blue belt clamp (9,2).
• Take the seat belt out from between the base and the blue belt clamp (10,1) and fasten the belt
clamp (10,2).
• Remove the Maxi-Cosi EasyBase 2 from the car.
4. INSTALLING AND REMOVING THE MAXI-COSI CABRIOFIX/PEBBLE
A. Installing the Maxi-Cosi CabrioFix/Pebble
• Position the Maxi-Cosi CabrioFix/Pebble facing backwards (with the back facing the direction of driving)
on top of the Maxi-Cosi EasyBase 2 (11). The carrying handle should be in the upright position.
• Click the Maxi-Cosi CabrioFix/Pebble with its two spindles onto the anchor points of the Maxi-Cosi EasyBase 2
(12).
• NOTE! A clear click should be audible and the indicators should now be completely on green (13).
• NOTE! Under no circumstances should this product be used if the indicator remains on red. Carry out
the above actions again. In case of doubt or if you have any questions, contact the manufacturer.
• Check that Maxi-Cosi CabrioFix/Pebble has been installed correctly by pulling on it.
To install your child in the Maxi-Cosi CabrioFix/Pebble or to remove him/her, see the Maxi-Cosi
CabrioFix/Pebble user instructions. The optimum safety of your child is only guaranteed if the Maxi-Cosi
CabrioFix/Pebble is used correctly. It is therefore important that you take the time to read these
instructions through carefully. However, if you do not have these instructions, contact our service point in
your country or download the necessary information from our internet site: www.maxi-cosi.com.
13
12
11
10
9
8
10
0245_GBA_EasyBase_I_BW:-- 16-06-2009 14:26 Pagina 10
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxi-Cosi Easy Base 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxi-Cosi Easy Base 2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info