464012
67
Zoom out
Zoom in
Previous page
1/88
Next page
Section 5 TROUBLE SHOOTING
5-13
Network Adapter Problems
The Ethernet adapter does not work –
n Go to [Start > Settings > Control Panel] and double click
the System icon. Select the Device Manager tab from the
System Properties. Double-click on Network Adapters and
check if SiS 0900 PCI Fast Ethernet Adapter appears as
one of the adapters. If it does not exist, Windows has not
detected the SiS adapter or the device driver has not been
installed. If there is a yellow mark or red cross on the SiS
network adapter, there may be a device or resource conflict.
Consult Windows manual on how to solve this problem.
n Make sure the physical connections on both ends of the
cable are good.
n The hub or concentrator may not be working properly. Check
to see if other workstations connected to the same hub or
concentrator are working.
n Repeat the undock and then dock sequence.
n Try restarting Windows with the port replicator already
connected to the network.
The Ethernet adapter does not appear to operate in the
100Mbps transmission mode –
n Make sure the hub you are using supports 100Mbps
operation.
n Make sure that your RJ-45 cable meets the 100Base-TX
requirements.
n Make sure the Ethernet cable is connected to the hub‘s
socket that supports 100Base-TX mode. The hub may have
both 100Base-TX and 100Base-T sockets.
PC Cards do not function-
n Make sure you have properly installed the driver for the card.
n Consult the card`s manual or contact the vendor for trouble-
shooting.
PC Card (PCMCIA) Problems
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Vision 350M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Vision 350M in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info