464012
27
Zoom out
Zoom in
Previous page
1/88
Next page
2-6
USER`S MANUAL
The Detailed Description of Hard Disk Drive Setting
Select Auto and let BIOS to configure the drive parameters
automatically. After press “Enter”, BIOS display the drive
parameters. If the dectected drive paramters were not correct or
you’re trying to enable the enhanced IDE feature, you may still
change the value manually.
n LBA Mode: (Large Mode)
Select “On” if the drive has a capacity larger than 540MB.
n Blk Mode: (Block Mode)
Select “On” is to allow blocking data transmission.
n 32 Bit Mode:
Select “On” to allow data tranmission in 32 bit.
n PIO Mode:
It is suggested to select “Auto” to let BIOS arrange the PIO
mode setting. If the selected PIO mode is not supported by
the IDE drive, the hard disk drive won’t work properly. If the
drive PIO mode is known, you’re certainly may select the
appropriate PIO mode from 1 to 5.
Entering Drive Parameters
Any hard disk drive, Primary Master, Primary Slave, Secondary
Master and Secondary Slave, to be configured as Hard Disk Drive
Type between 1-46, you may need to enter the correct drive
parameters.
Parameter Description
Type
The number for a drive with certain identification
parameters.
Cyln The number of cylinders in the disk drive.
Heads The number of heads.
WPcom
The actual physical size of a sector gets
progressively smaller as the track diameter
diminishes. This parameter is the cylinder
number on the disk surface where write
precompensation begins.
Sec
The number of sectors per cylinder.
MFM drives have 17 sectors per cylinder. RLL
drives have 26 sectors per cylinder. ESDI
drives have 34 sectors per cylinder. SCSI and
IDE drives have even more sectors per cylinder.
The Decription of Drive Parameters
Note:
AMIBIOS
automatically
sets IDE drive
parameters.
Set the setting as
“USER” to enter
the MFM, ESDI,
or DLL drive
parameters.
Select “Not
Installed” for
SCSI Drive.
Choose
”CDROM” option
for ATAPI CD-
ROM drive.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Vision 350M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Vision 350M in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info