650496
62
Zoom out
Zoom in
Previous page
1/85
Next page
Figure 31. Order of Drive Carriers
8. With the black lever in the fully open position, insert the drive carrier into the storage system.
The green latch at the front of the drive carrier must be to the right of the storage system. Do
not push on the black drive carrier lever until the lever begins to close by itself. Once the black
drive carrier lever begins to close by itself, push on it to lock the driver carrier into place.
Important
Ensure that the drive carrier is orientated so that the hard disk is uppermost and the drive carrier
lever opens from the right. Also, do not force the drive carrier into the storage system. If there is
resistance, make sure that the drive carrier lever is in the fully open position.
9. Reconnect the storage system to its power source.
10. Power up the storage system by pressing the power button on the front of the unit. The
System Status LED will flash while the system is booting up.
Note
If your hard drive was part of a RAID array previously, it will rebuild automatically.
Note
If you are replacing a failed hard disk in a RAID array, the Drive Status LED will blink yellow until
the array is rebuilt. Once the RAID is rebuilt, the Drive Status LED will turn green indicating normal
operation. If the RAID rebuild fails, the Drive Status LED will turn a continuous yellow, indicating a
fault condition. If this occurs, remove the hard drive from the storage system and check it or replace
it with another hard disk.
Note
If you replace all of the hard disks with higher-capacity hard disks, you must log in to the Manager as
administrator to reconfigure the disks.
62 Managing Your Storage System
1
2
3
4
1
2
4
3
2
1
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata SN 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata SN 40 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info