650496
7
Zoom out
Zoom in
Previous page
1/85
Next page
7MAXDATA SN 40 M1 – User Guide
1 Safety and Warnings
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the instructions.
Warnings
Only a technically qualified person should maintain or configure the storage system. The SN 40 storage
system contains no user-serviceable parts. Refer servicing to qualified personnel.
Heed safety instructions
Before working with your server product, whether you are using this guide or any other resource as a
reference, pay close attention to the safety instructions. You must adhere to the assembly instructions
in this guide to ensure and maintain compliance with existing product certifications and approvals.
System power on/off
The power button DOES NOT turn off the system AC power. To remove power from storage system,
you must unplug the AC power cord from the wall outlet or the chassis. Make sure the AC power
cord is unplugged before you open the chassis, add, or remove any components.
Installation/Assembly Safety Instructions
The power supply in this product contains no user-serviceable
parts. Refer servicing only to qualified personnel.
Do not attempt to modify or use the supplied AC power cord if it is
not the exact type required. A product with more than one power
supply will have a separate AC power cord for each supply.
The power button on the system does not turn off system AC
power. To remove AC power from the system, you must unplug
each AC power cord from the wall outlet or power supply.
The power cord(s) is considered the disconnect device to the main
(AC) power. The socket outlet that the system plugs into shall be
installed near the equipment and shall be easily accessible.
SAFETY STEPS: Whenever you remove the chassis covers to access
the inside of the system, follow these steps:
1.
Turn off all peripheral devices connected to the system.
2. Turn off the system by pressing the power button.
3. Unplug all AC power cords from the system or from wall outlets.
4. Label and disconnect all cables connected to I/O connectors or
ports on the back of the system.
5. Provide some electrostatic discharge (ESD) protection by
wearing an antistatic wrist strap attached to chassis ground of
the system-any unpainted metal surface-when handling compo
-
nents.
6. Do not operate the system with the chassis covers removed.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata SN 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata SN 40 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info