650498
3
Zoom out
Zoom in
Previous page
1/8
Next page
SuperLoader 3 Quick Start Guide
an environment compatible with the manufacturer’s
maximum recommended ambient temperature.
Reduced Air Flow 0
Installation of the equipment in a rack should be such that
the amount of air flow required for safe operation of the
equipment is not compromised.
Mechanical Loading 0
Mounting of the equipment in a rack should be such that a
hazardous condition is not achieved due to uneven
mechanical loading.
Overloading the Circuit 0
Consideration should be given to the connection of the
equipment to the supply circuit and the effect that
overloading of circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when
addressing the concern.
Reliable Earthing
(Grounding) 0
Reliable earthing of rack-mounted equipment should be
maintained. Particular attention should be given to supply
connections other than direct connections to the branch
circuit, such as use of power strips.
Understanding Autoloader Features 0
The autoloader is compatible with most operating systems
and environments that support the SCSI interface, but
requires either direct support from the operating system or
a compatible backup application to take full advantage of
its many features.
Bar Code Reader 0
The bar code reader is enclosed within the body of the
autoloader. The bar code reader automatically scans each
cartridge in the magazine upon power up, after a reset,
after an import or export, or when a re-inventory command
is issued. Beyond that, there is no user interface with the bar
code reader via the front panel operator controls or LCD
screen. The information from each label is stored in memory
and available through SCSI and On-board Remote
Management to the computer's operating system or backup
application upon request.
If utilizing the bar code reader, you must apply or slide the
bar code labels into the appropriate slot on the front of
each cartridge. The labels must conform to ANSI/AIM BC1 -
1995 Uniform Symbology Specification Code 39. A set of
bar code labels is initially included with the autoloader.
Refer to www.quantum.com
for information on obtaining
additional bar code labels.
Product Overview 0
Figure 1 Front Panel Controls
Figure 2 Back Panel Overview
1 Power switch
2Mailslot
3 Front panel LEDs
4 Front panel LCD screen
5 Function keys
6 Left magazine (or blank)
7Right magazine (or blank)
1 68-pin HD SCSI connectors
2Fan vent
3 Power connector
4 Ethernet connector
5 Power switch
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum SuperLoader 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum SuperLoader 3 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maxdata Quantum SuperLoader 3

Maxdata Quantum SuperLoader 3 Quick start guide - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info