169964

Maxdata platinum 2200 ir Manual

21
Zoom out
Zoom in
Previous page
1/44
Next page
21MAXDATA Server PLATINUM 2200 IR M6
4 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the safety instructions at the beginning
of this manual.
Tools and Supplies Needed
• Phillips (cross head) screwdriver (#1 bit and #2 bit)
• Needle-nosed pliers
• Antistatic wrist strap and conductive foam pad (recommended)
System References
All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis
as it would be positioned for normal operation.
Removing and Installing the Chassis Cover
The MAXDATA PLATINUM 2200 IR Server Chassis must be operated with the top cover in place to
ensure proper cooling. You will need to remove the top cover to add or replace components inside of
the chassis. Before removing the top cover, power down the server and unplug all peripheral devices
and the AC power cable.
NOTE
A nonskid surface or a stop behind the chassis may be needed to prevent the chassis from sliding
on your work surface.
1. Observe the safety and ESD precautions at the beginning of this book.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the shipping screw if it is installed. See letter “A” in the figure below.
5. While holding in the blue button at the top of the chassis in (see letter “B”), slide the top cover
back until it stops (See letter “C”).
6. Lift the cover upward to remove it.
Figure 15. Removing the Chassis Cover
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 2200 ir at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 2200 ir in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info