169742

Maxdata platinum 220 select Manual

23
Zoom out
Zoom in
Previous page
1/31
Next page
22 Server Description
23MAXDATA PLATINUM 220 Server
CR7J1
Figure 5. Location of the Standby Power Indicator LED CR7J1
Hardware Management and Monitoring
The Hardware Management features enable the board to be compatible with the Wired for
Management (WfM) specification. The board has several hardware management features, including
the following:
• Remote temperature sensing near the Vreg
• Power supply monitoring (+5V, +3.3V, 3.3 VSB, +1.5V, and VCCP) to detect levels above
or below acceptable values
• Fan monitoring though four fan tachometer inputs. Monitoring can be implemented using
LANDesk Client Manager or other third-party software.
• Chassis intrusion detection
The server board S875WP1-E has an integrated Hardware Management ASIC that is responsible for
hardware monitoring. Together, the Hardware Management ASIC and the LANDesk Client Manager
(LDCM) 6.3 software provide basic server hardware monitoring that alerts a system administrator if
a hardware problem occurs on an Intel Server Board S875WP1-E Based system.
The LDCM software is for use with Windows
®
2000 Server and Windows
®
2000 Advanced Server
operating systems. Other operating systems, such as Red Hat Linux cannot be monitored with
LDCM.
Password Security
The BIOS includes security features that restrict whether the BIOS Setup program can be accessed
and who can boot the server. A supervisor password and a user password can be set for the Setup
menu and for booting the server, with the following restrictions:
• The supervisor password gives unrestricted access to view and change all Setup options.
If only the supervisor password is set, pressing <Enter> at the password prompt of Setup
gives the user restricted access to Setup.
• If both the supervisor and user passwords are set, you must enter either the supervisor
password or the user password to access Setup. Setup options are then available for viewing
and changing depending on whether the supervisor or user password was entered.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata platinum 220 select at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata platinum 220 select in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info