Manual Maxdata Platinum 100 I (page 22 of 25) (English)

464013

Zoom out

Zoom in

1/25

22 23MAXDATA PLATINUM 100 I M8Server Utilities

Conﬁguring the System for embedded Serial ATA RAID

Conﬁguring the BIOS

1. Make sure you are having at least two SATA hard drives.

2. Enter system BIOS Setup by pressing the <F2> key after the Power‑On‑Self‑Test (POST)

memory tests begin.

3. Go to “Advanced” ‑ “SATA Controller Configuration”; ensure “Configure SATA as” is set

to “RAID”. Post product launch an additional selection between LSI and Intel

RAID will be

possible here. At launch the Intel

Matrix Storage Manager Option will be enabled by this

setting.

4. Save your settings by pressing <F10>.

Creating Intel

Matrix Storage Technology RAID set

/ NOTE

This RAID is supported for Windows operating systems only.

1. Upon re‑boot you will see the Intel

Matrix Storage Manager Option ROM status message on

the screen. Press CTRL‑I to enter the RAID Option ROM user interface.

2. In the User Interface menu, select option #1; Create RAID Volume. Enter a volume name,press

<enter>. The RAID Volume name must be in English alphanumeric ASCII characters.

3. Use the arrow keys to select the RAID level (0/1/5/10), press <enter>.

4. Select the drives to be used in the RAID array (only if there are more than two drives available),

press <enter>.

5. Select the stripe size (only for RAID 0/5), and press <enter>.

6. Enter the size of the volume (If you select less than the maximum volume size you can create

a second RAID array on the remaining portion of your volume, not recommended), and press

<enter>.

7. Finally press <Y> to confirm your selections.

8. Exit the Option ROM user interface by pressing <ESC>.

Creating LSI Technology RAID set

/ NOTE

This option will be implemented post product launch.

1. Upon re‑boot you will see the Embedded RAID Option ROM status message on the screen.

Press CTRL‑E to enter the RAID Option ROM user interface.

2. In the Management Menu, select option #1: “Configure”. Choose “Easy Configuration”.

3. Mark ready drives to be used in the RAID array using the space bar and press F10 to end

selection.

4. On the “Select Configurable Arrays” screen press <space> and <F10>.

5. Enter the properties of the new RAID: RAID Level (0/1/10), Size, Stripe Size. Accept the

settings.

6. Exit the Easy Configuration Screen using <ESC> and save the configuration.

7. Return to the Management Menu and Initialize the new RAID.

8. Exit the Option ROM user interface by pressing <ESC>.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Platinum 100 I in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maxdata Platinum 100 I

Maxdata Platinum 100 I User Manual - German - 27 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxdata Platinum 100 I Manual

Product: