Manual Maxdata FAVORIT XS Series (page 34 of 44) (English)

650508

Zoom out

Zoom in

1/44

MAXDATA

FAVORIT XS Series

Handbuch Manual Ma-

nuel Manuale Handleiding Handledningen Hånd-

bok Vejledning Käyttöopas Instrukcja Használati

Handbuch Manual Manuel Manuale Handleiding

Handledningen Håndbok Vejledning Käyttöopas

Instrukcja Használati Handbuch Manual Manuel

Manuale Handleiding Handledningen Håndbok Vej-

ledning Käyttöopas Instrukcja Használati Handbuch

Manual Manuel Manuale Handleiding Handled-

ningen Håndbok Vejledning Käyttöopas Instrukcja

Használati Handbuch Manual Manuel Manuale

Handleiding Handledningen Håndbok Vejledning

MAXDATA FAVORIT XS Series

User's Manual

FXSUK1.0

3MAXDATA FAVORIT XS Series

Table of Contents

Introduction 5

Technical Speciﬁcations ..................................................................................................... 6

Note ................................................................................................................................... 7

User note ...................................................................................................................... 7

Laser (service note) ...................................................................................................... 7

Use ............................................................................................................................... 8

Environmentally sound PC system ............................................................................... 8

Device Durability ........................................................................................................... 8

Take Back Guarantee ..................................................................................................... 8

Recyclable Device Construction .................................................................................... 8

Material Requirements for Plastic Cases and Case Parts ............................................. 9

Material Requirements for Printed Circuit Boards ........................................................ 9

Marking of Plastic Materials.......................................................................................... 9

Noise Emission ............................................................................................................. 9

Batteries ........................................................................................................................ 9

Information on the return of electrical and electronic waste in EU countries ..............10

Energy Consumption ...................................................................................................11

Deﬁnition of the MAXDATA warranty .............................................................................. 12

MAXDATA warranty period ......................................................................................... 12

Scope of the MAXDATA warranty ............................................................................... 12

Exclusions from the MAXDATA warranty .................................................................... 13

MAXDATA restriction to liability .................................................................................. 14

Governing law ............................................................................................................. 14

Data Backup ................................................................................................................ 15

Wireless LAN .................................................................................................................. 16

Additional safety notes for units with wireless LAN ........................................................17

CE-labelling for units with wireless LAN and Bluetooth ............................................. 18

Restrictions ..................................................................................................................... 19

France ......................................................................................................................... 19

Italy ............................................................................................................................. 19

Netherlands ................................................................................................................ 19

Radio frequencies for units with wireless LAN ............................................................... 20

Frequencies ................................................................................................................ 20

Legal requirements - exception clauses...................................................................... 21

Before Getting Started .................................................................................................... 22

Before Initial Operation 23

Contents .......................................................................................................................... 23

Positioning the Computer ................................................................................................ 23

Temperature and humidity .......................................................................................... 23

Connecting the computer ........................................................................................... 23

Avoiding risk of stumbling ........................................................................................... 23

Data storage media ..................................................................................................... 24

Avoid jarring ................................................................................................................ 24

Allow for ventilation .................................................................................................... 24

The PC in Detail 25

Elements of the PC ......................................................................................................... 25

Front Panel Components ............................................................................................ 25

The Rear View ............................................................................................................. 26

Connecting the Monitor .................................................................................................. 27

Connecting Peripheral Devices ........................................................................................ 28

Connecting the Power Adapter and the Power Cable ..................................................... 29

Switching the PC On ....................................................................................................... 30

Switching the System Off ................................................................................................ 31

The CMOS Battery .......................................................................................................... 31

Components of the PC 33

The Optical Drive ............................................................................................................. 33

The Card Reader (depending on the system conﬁguration) ............................................ 34

The Keyboard (optional) ................................................................................................... 35

Troubleshooting 39

Index 4

Table of Contents

5MAXDATA FAVORIT XS Series

Introduction

Congratulations on your purchase of the MAXDATA personal computer! We are conﬁdent

that it will meet your high expectations. This manual will familiarize you with your MAXDATA

PC’s components and features. We have taken all possible care to ensure that this manual

contains correct, accurate information. However, we cannot assume liability for any pos-

sible errors. Please refer to your dealer for reporting errors or comments. We appreciate

all feedback and are eager to incorporate any useful suggestions and improvements. All

rights reserved. No part of this manual may be reproduced, processed or distributed in any

form (print, photocopy, microﬁlm or any other process) or processed by an electronic sys-

tem without prior written permission of MAXDATA. Other brand names may be registered

trademarks and must be treated as such.

Technical Speciﬁcations

Your PC requires alternating current at 50/60 Hz. To connect the device to the power supply,

plug in the power cable. To disconnect it from the power supply, pull out the power cable.

Utilize an easily accessible grounded outlet.

The input voltage is: 100 - 240 V~.

Operating environment:

Temperature : 10°C - 35°C

Humidity : 30% - 70% relative humidity

(non-condensing)

Dimensions: Width / mm Height / mm Depth / mm

226 42 172

Please refer to the box label for more detailed information on the system’s speciﬁcations

(motherboard, graphics, sound etc.).

Introduction

MAXDATA FAVORIT XS Series

Note

This device meets the EN 55022 and EN 61000-3-2 standards for interference emissions,

the EN 55024 standard for interference, and the EN 60950 electrical safety standard. Any

change made to this device without approval by the manufacturer voids any guarantee of

meeting these standards. In order to assure EMC compliance (electromagnetic compat-

ibility), please follow the corresponding guidelines in this manual.

User note

This device was carefully designed and tested to prevent radio interference. However, you

should note the following for external data cables: If you need to replace any of the data

cables speciﬁed by the manufacturer, be sure that the replacement cables have the same

shielding speciﬁcations as the original cable to prevent interference. Always use shielded

power lines and only use external devices that are CE certiﬁed.

No guarantee for meeting these standards can be maintained if you do not conform to the

above guidelines.

Laser (service note)

Caution!

Laser radiation when the cover is open!

This laser radiation is contained in the CD drives. When dismantling and /or opening this

drive, be careful:

• not to look into the beam, not even with optical instruments

• not to expose yourself to the beam

• to avoid eyes or skin being exposed to direct or scattered beam.

Failure to observe these guidelines can in the worst case lead to permanent blindness.

The built-in CD drives contain no user-serviceable or reparable parts. CD drives are to be

repaired solely by the manufacturer. Laser products of laser classes 1 to 3B may be used

in the product. When the housing is unopened the device meets the requirements of laser

class 1. By opening the device, laser devices up to laser class 3B may be accessible. The

built-in CD drives contain no user-serviceable or reparable parts. CD-ROM drives are to be

repaired by authorized technicians.

Use

This product is not intended for medical, life saving or life sustaining usage.

Environmentally sound PC system

This system was constructed to be environmentally safe, which can be seen in its dura-

bility, enhancement possibilities and recyclability. For devices featuring the “Blue Angel”

environmental label, details regarding disposal, recycling, power consumption and noise

emissions can be found in the accompanying supplement.

Device Durability

This PC is a modular system. The components used can be easily exchanged or removed.

The devices have been built in such a way that the following enhancements are always

possible:

• Processor upgrade

• Adding or replacing memory modules

• Replacing the mass storage

Please consult the enclosed warranty documentation for the warranty conditions.

Take Back Guarantee

We offer a take back guarantee for all our products, if the device shows signs of normal use.

Returned devices are re-used or scrapped in an environmentally safe way. You can return

your device to your local dealer.

Recyclable Device Construction

This device conforms with the principals of VDI guideline 2243 on “Construction of recyclable

technical products”. This guideline in detail embodies:

• Avoid non detachable connections (e.g. gluing or welding) between different materi

als.

• Mechanical connections must be easily detachable;

• Avoid covered parts or composite materials;

• The device must be easily dismantlable, also for a simple repair;

• Reduction of the use of multiple materials.

• Reduction of the use of multiple plastics for case parts

• Nearly all plastic case parts are made from the same, recyclable material.

Introduction

MAXDATA FAVORIT XS Series

Material Requirements for Plastic Cases and Case Parts

• All plastics used for the case are manufactured without the use of dioxins and furans.

• An independent testing laboratory in Germany has

tested and approved the character-

istics of the plastics used.

Material Requirements for Printed Circuit Boards

• All our suppliers have ensured us that their circuit boards do not contain PCB (poly-

bromite biphenyl), PBDE (polybromite diphenylether) or chlorinated parafﬁn.

Marking of Plastic Materials

• All plastic parts of this device are marked in accordance with ISO 11469. This ensures

a problem free separation of the different materials when recycling.

Noise Emission

This PC meets the requirements for noise emissions according to EN 27779 and falls below

the following values:

Operation mode Sound power level LW (dB(A))

(according to ISO 9296))

Idle < 48

Drive operation < 55

Batteries

This device does not contain batteries containing heavy metals. The lithium batteries used

have an extremely long life span (> 10 years). Please consult the notes in the manual con-

cerning servicing, replacement or disposal of the battery.

Information on the return of electrical and electronic waste

in EU countries according to Directive 2002/96/EC, and its im-

plementation in respective national regulations

a) Reason and Purpose of Separate Collection

Users of electrical and electronic equipment are required to dispose of used devices sepa-

rately. Electrical and electronic equipment must not be disposed of together with unsorted

municipal solid waste (domestic refuse), as it contains a range of dangerous elements that

cause problems for waste management. Separate collection from regular municipal waste

is a prerequisite for the special treatment and appropriate recycling of electrical and elec-

tronic waste. This is essential, as many components of electrical and electronic devices are

damaging to the environment if they are not disposed of professionally. Disposing of the

devices along with unsorted municipal waste can cause harmful substances to enter the

waste ﬂow. The consequence would be a considerable burden on the environment.

b) Signiﬁcance the ‘Crossed-Out Wheelie Bin’

The crossed-out wheelie bin is the symbol for separate collection.

Electrical and electronic equipment marked with this symbol must not be

disposed of to-gether with municipal sorted waste (domestic refuse). Such

items can be handed in free of charge at public collection points.

c) Reuse, Recycling and Recovery

Electrical and electronic waste contains valuable raw materials such as iron, aluminum

and copper. These components must be treated selectively. A separate collection and a

selec-tive treatment are the basis for environmentally-friendly disposal and protection of

human health.

According to the particular terms, manufacturers are obligated to assume the costs associ-

ated with disposing of these devices as well as other obligations. This is to promote the

chief objectives of reuse and recycling. For this to be possible, consumers must dispose of

used devices that are no longer needed at communal collection points. Actively using these

return and collection systems contributes to the reuse, recycling and recovery of electrical

and electronic equipment and protects the environment.

d) Weight

Information on the weight of the acquired product can be found on the item list as well as

on the packaging.

Introduction

11MAXDATA FAVORIT XS Series

Energy Consumption

Our workplace computers are specially designed to save energy. The power consumption

listed on the label refers to the maximum possible power consumption, that is, if the com-

puter is fully expanded and receiving 100% of the allowed output from the power supply.

The devices can be disconnected from an external power source for at least 4 weeks without

losing any functionality.

You can specify the individual time settings for the energy-saving mode in the BIOS setup

The only way to prevent any energy consumption at all is to disconnect the workstation

from the power supply (by disconnecting the main plug).

33MAXDATA FAVORIT XS Series

Components of the PC

The Optical Drive

Depending on the system conﬁguration, your PC may be equipped with an optical drive

(e.g., a CD-ROM, DVD+/-RW or combination drive).

While the computer is running, insert the optical medium (CD or DVD) into the drive with

the label facing upwards, as shown in the ﬁgure.

If you would like to take out the disk, push the optical drive eject button (see ﬁgure) while

the computer is running. The disk will be automatically ejected.

Only insert one disk at a time into the drive. Do not insert any objects into

the drive other than the appropriate optical media.

The built-in CD-ROM drive is a class 1 laser product. Do not open the

device and do not look into the laser beam, even when using optical

instruments.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata FAVORIT XS Series in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maxdata FAVORIT XS Series

Maxdata FAVORIT XS Series User Manual - German - 44 pages

Maxdata FAVORIT XS Series User Manual - Dutch - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxdata FAVORIT XS Series Manual

Product: