761883
19
Zoom out
Zoom in
Previous page
1/20
Next page
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select DEL HS.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> and a list of registered handsets is displayed.
6. Press <UP/DOWN> to select one of the handsets that you want to de-register.
7. Press <OK> to confirm.
7.4.4 Change the dial mode
1. Press <MENU> and <UP/DOWN> to select BS SET.
2. Press <OK> and <UP/DOWN> to select DIALMODE.
3. Press <OK> and <UP/DOWN> to select TONE or PULSE.
4. Press <OK> to confirm.
7.4.5 Change the Flash Time
The flash time setting is country dependent. Please contact your local service provider for the correct settings.
1. Press <MENU> and <UP/DOWN> to select BS SET.
2. Press <OK> and <UP/DOWN> to select FLASH.
3. Press <OK> and <UP/DOWN> to select your desired flash time (SHORT, MEDIUM, LONG).
4. Press <OK> to confirm.
7.4.6 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your
phone against unauthorized use. The default system PIN code is 0000.
1. Press <MENU> and <UP/DOWN> to select BS SET.
2. Press <OK> and <UP/DOWN> to select CHG PIN.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4.Enter the old system PIN.
5. Press <OK> and enter the new system PIN.
6.Press <OK> and enter the new system PIN again.
Note: If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, user is
requested to enter the valid system PIN again in Step 5.
6. Press <OK> to confirm.
7.5 Registration
Your handset and base station is pre-registered. Up to five handsets can be registered to a single base station.
If for some reason, the handset is not registered to the base station (<Antenna icon> flashes even when the
handset is near the base station), register your handset according to the following procedure.
1. Press and hold <PAGE> on the base station for about five seconds, the base station is entered into registration
mode.
2. Press <MENU> and <UP/DOWN> to select REGISTER.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> to confirm.
If the handset registration is successful, you will hear a confirmation tone and the <antenna icon> will stop flashing.
The handset will automatically be allocated the next available handset number. This handset number is shown in
the handset display in standby mode. If the handset registration is unsuccessful, the <antenna icon> will still flash.
7.6 Reset Your Phone
You can reset your phone to the default settings. After reset, all you personal settings and call log entries will be
deleted, but your phonebook remains unchanged.
1. Press <MENU> and <UP/DOWN> to select DEFAULT.
2. Press <OK> and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press <OK> to confirm.
5. Press <OK> to re-confirm.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxcom MC 6800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxcom MC 6800 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maxcom MC 6800

Maxcom MC 6800 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info