545558
117
Zoom out
Zoom in
Previous page
1/133
Next page
SFX SERIES USER’S GUIDE
Rev 2.2 115
Figure B- 4 Cyphercast Configuration Edit Page
The following fields can be edited on the Cyphercast Configuration Edit page:
Edit Field Description
ECM/EMM IP
Address
Enter the valid multicast IP address in dotted decimal notation. This address and the UDP Port
are configured for receiving the ECM/EMM data, and must match the configuration of the
Cyphercast Gygacrypt head end.
EMM UDP Port Enter a valid UDP port number for EMM stream. The ECM port number cannot be entered as it
is always 1 more than the EMM port number. Note this port number is required and must
match the Cyphercast
Gygacrypt head end configuration.
ECM input Interface Select the interface (eth0, eth1 or sat0) on which the receiver will receive the ECM/EMM data.
Front Panel LED Indications
When the Cyphercast or Softcell option is installed and enabled, certain indicators on the front panel will behave
differently and provide additional status information, as follows:
Indicator Description
Lock For receivers with the Softcell option enabled and using either of the Ethernet ports as the
transport stream source, the LOCK led will be off.
OPTIONS Purpose: provides status of the Cyphercast / Softcell option.
Colour: off/green, where:
Solid Green – the Cyphercast or Softcell option is installed and enabled.
Flashing Off/Green – EMM/ECM packets are being received.
Off – the Cyphercast or Softcell option is installed or enabled.
NOTE:
The PID that
carries the
ECM/EMM data
is of type Net
PID (see
section on PIDs
and Ports). In
order to receive
the data, you
must configure
the Net PID
first.
NOTE:
When you Send
Update with the
new Cyphercast
Configuration,
the multicast
ECM/EMM
stream
configured here
becomes a non-
editable static
route in the
static routing
table, with the
interface as
sat0.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Max SFX Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Max SFX Series in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info