Enter the elevation set up and data review menu: From any screen, press the left button for 2 seconds.
– On Wintech USB Alti and Wintech USB Ultimate, briey press the left button (BPL) 3 times to switch to the lap time data review section: “Cr” appears on the computer screen.
– On Wintech USB HR, briey press the left button (BPL) once to switch to the lap time data review section: “Cr” appears on the computer screen.
– On Wintech USB “Cr” appears on the computer screen.
Briey press the right button (BPR) to enter the lap time data review section.
The review of the rst lap time automatically starts in the following order:
– Elapsed time in the rst lap time
– Distance ridden during the lap time
– Average speed during the lap time
– Average vertical speed during the lap time (Wintech USB Alti and Wintech USB Ultimate only)
– Average slope in % during the lap time (Wintech USB Alti and Wintech USB Ultimate only)
Each piece of information is displayed for 3 seconds.
If no lap time has been recorded during the trip, it is not possible to enter the lap time data review section
when briey pressing the right button on the “Info” screen.
At any time of the sequence, briey press the left button (BPL) to switch to the next lap time.
These data will cycle through until you press and hold the left button for 2 seconds. Then, the computer switches back to the last active screen.
If no button is pressed for 2 minutes, the computer automatically switches back to the last active screen.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Mavic Wintech USB at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Mavic Wintech USB in the language / languages: English as an attachment in your email.
The manual is 5,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
