472810

Mavic Wintech FS Manual

12
Zoom out
Zoom in
Previous page
1/99
Next page
12
ENGLISH
3. FITTING/REMOVING THE COMPUTER
3.1 Slide the computer onto the mount from the front until it
locks into place with an audible click.
3.2 To remove the computer, press the button underneath the
mount and slide
the computer out
towards the front of
the bike.
4. INSTALLING THE MAGNET
BRACKET
Place the magnet bracket on a spoke
on the right side of the wheel, about 3
cm from the rim. The magnet must
be turned toward the outside of
the wheel.
Caution: If you are using a
wheel with extra flat spokes,
you need to cut the tabs on the
magnet bracket beforehand.
5. INSTALLING THE SPEED SENSOR
5.1 Insert a wire tie into each
slot designed for this purpose
from the sensor side. The head
of the wire tie must go in its slot
as far as possible.
5.2 Place the sensor on the right
blade of the fork (the sensor
must be pointing forward); close
the fixing collars without tighten-
ing them.
6. INSTALLING THE
BATTERIES
Power supply for the computer: 1 CR2032 battery.
Power supply for the speed sensor: 1 CR2032 battery.
Only use this type of battery.
Installing the batteries:
6.1 Remove the battery cover by turning
it a quarter turn anticlockwise, using
a coin.
6.2 Insert the battery into its recess,
keeping the + side uppermost.
6.3 Refit the battery cover and close it by turning
it a quarter turn clockwise.
Do not to use excessive force, or you will
damage the unit.
Check the condition of the seal on the battery
cover each time you change the battery. Replace
the battery cover if the seal is damaged.
Always perform the above operations in a dry
place.
1
2
6.2
6.1
5.3 Adjust the position of the speed sensor so the center of the
magnet is aligned with one of the arrows on the sensor. The
distance between the magnet and the sensor must be between
5 - 10 mm.
5.4 Tighten the wire tires and cut them flush.
IMPORTANT: At this point, your computer is not yet ready
to function. You still need to set the necessary programs,
and then perform the pairing operation of your device.
3.1 3.2
5.1
5.2
5.3
5.4
4.1
4.1
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech FS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech FS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info