472806
13
Zoom out
Zoom in
Previous page
1/26
Next page
12
14. ELEVATION SET UP AND DATA REVIEW MENU
14.1. Entering the Elevation set up and data review menu
From any screen, press and hold the left button (BPL) for 2 seconds to enter the elevation set
up and data review menu.
The elevation set up and data review menu is sequentially organized in sub-menus, in the
following order:
1. Recall of home altitude “Ho” (Wintech USB Alti and Wintech USB Ultimate only)
2. Setting up the current altitude “Cu” (Wintech USB Alti and Wintech USB Ultimate only)
3. Lowest and highest trip elevation + time spent bellow, in and above the HRM target zone
“Info” (Wintech USB Alti, Wintech USB HR and Wintech USB Ultimate only)
4. Reading of lap time (“Cr”)
5. Reading of odometers per bike number (“odo”)
To move from one sub-menu to the next one, briey press the left button (BPL).
When on one of the sub-menu, briey press the right button to enter this sub-menu.
In this mode, if there is no operation for 2min, the computer automatically exits the menu and
return to the previous active screen.
When on one of the sub-menu, briey press the right button to enter this sub-menu.
In this mode, if there is no operation for 2mn, the computer automatically exits the menu and
return to the previous active screen.
The reading of altitude and heart rate data, lap time and odometer per bike can
be performed more easily and more rapidly using the Wintech Manager software
delivered with your computer.
14.2. Recall of Home Altitude
(Wintech USB Alti and Wintech USB Ultimate only)
This function will make adjusting the altitude before a ride simple and easy, thanks to the home
altitude set at chapter 10.3.3 of this user guide.
Enter the elevation set up and data review menu:
From any screen, press the left button for
2 seconds: “Ho” appears together with the
logo.
Briey press the right button (BPR) to
recall the home elevation. The gure
ashes.
Press the right button (BPR) again to
validate and return to the last active
display.
14.3. Setting up the current elevation
(Wintech USB Alti and Wintech USB Ultimate only)
When you occasionaly don’t start from the place which elevation is registered in your computer
(home elevation), you need to adjust the current altitude.
Enter the elevation set up and data review section:
From any screen, press the left button for 2 seconds: “Ho” appears together with the
logo.
Briey press the left button (BPL) once to switch to the Current elevation set up screen:
“Cu” appears on the computer screen.
Briey press the right button (BPR) to enter the Current Altitude set up menu: the rst digit of the
current altitude ashes.
Briey press the left button (BPL) to adjust the rst digit.
Briey press the
right button (BPR)
to validate your
choice and move to
the next digit.
Repeat those steps
to the 4
th
current
altitude digit.
Briey press the
right button (BPR)
to validate the 4
th
current altitude digit,
exit the elevation set
up and data review
menu and switch
back to the last
active screen.
14.2
2 sec.
1 click
1 click
any
screen
EXIT
14.3
2 sec. 1 click 1 click
1 click
select select select select
1 click 1 click 1 click
any
screen
EXIT
14.1
2 sec.
any
screen
1 click 1 click 1 click 1 click 1 click
EXIT
1 click
enter
1 click
enter
1 click
enter
1 click
enter
1 click
enter
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mavic Wintech Alti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mavic Wintech Alti in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info