664314

Matrix T-DPT Manual

10
Zoom out
Zoom in
Previous page
1/13
Next page
10
WALK / SPRINT
PROPER USAGE
SLED MODE
PROPER USAGE
PROPER USAGE
The treadmill can be used in two modes; sled or walk/sprint. To use the
treadmill in sled mode, remove the harness so the user has access to the
upper and lower sled handlebars. To use the treadmill in walk / sprint
mode, connect the harness and adjust by using the instructions below.
Emergency dismount can be done by grabbing the front or side
handlebars and jumping with both feet on the side rails.
ADJUSTING THE HARNESS
After stepping onto the treadmill, slowly walk into the harness to check for
proper height. The harness should sit comfortably at about waist height.
If the harness needs to be adjusted, release the front connection
point and reconnect the harness at the correct height.
ADJUSTING THE BRAKES
The treadmill is equipped with two brakes, a sled brake and a speed brake. The
left hand side lever controls the sled brake and the right hand lever controls the
speed brake. The sled brake has 8 resistance settings and the speed brake has 11.
The brakes are designed to be used together or independently of each other.
The sled brake is designed to simulate the resistance created when pushing a
sled. When using this brake, resistance will be immediately applied to the belt.
The speed brake is designed to simulate the resistance created
when running with a parachute. When using this brake,
resistance will increase as the user increases speed.
SLED MODE WALK / SPRINT MODE
HARNESS
SPEED BRAKE
(RIGHT SIDE)
SLED BRAKE
(LEFT SIDE)
LEVELING THE EQUIPMENT
It is extremely important that the levelers are correctly adjusted
for proper operation. An unbalanced treadmill may cause belt
misalignment or other issues. Use of a level is recommended.
Once you have placed the treadmill where you intend to use it, raise or lower
one or both of the adjustable levelers located on the bottom-front of the frame.
ENGLISH
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix T-DPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix T-DPT in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info