738357
10
Zoom out
Zoom in
Previous page
1/92
Next page
10
MAINTENANCE SCHEDULE
ACTION FREQUENCY
Clean entire machine using water and a mild soap
or other Matrix approved solution (cleaning agents
should be alcohol and ammonia free).
DAILY
Remove the back cover. Check for debris and clean
with a dry cloth or small vacuum nozzle.
MONTHLY
Lubricate magnets EVERY 6 MONTHS
MAINTENANCE
1. Any and all part removal or replacement must be
performed by a qualied service technician.
2. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country’s local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for
any reason. They contain important information. If unreadable
or missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to
smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance
or repair of any kind is qualied to do so. MATRIX dealers will provide
service and maintenance training at our corporate facility upon request.
WARRANTY
Please visit www.matrixtness.com for warranty information
along with warranty exclusions and limitations.
PRODUCT SPECIFICATIONS
Console Back-lit LCD
Max User Weight 181.4 kg / 400 lbs
Product Weight 132 kg / 290 lbs
Shipping Weight 155 kg / 340 lbs
Overall Dimensions (L x W x H)* 182 x 69 x 166 cm / 72” x 27” x 65”
* Ensure a minimum clearance width of 0.6 meters (24”) for access to and
passage around MATRIX equipment. Please note, 0.91 meters (36”) is the
ADA recommended clearance width for individuals in wheelchairs.
LUBRICATING THE MAGNETS
1. Use a coin to turn the release
screw 90˚ clockwise.
2. Remove plastic cover.
3. Spray the magnet areas as shown.
Spray each area for about 0.5 second
(or around 0.25cc of oil quantity). Matrix
recommends chain grease for lubrication.
4. Replace plastic cover and turn
release screw 90˚ counter-clockwise
to secure plastic cover.
ENGLISH
2
1
3
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix SPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix SPT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 14,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info