738348
5
Zoom out
Zoom in
Previous page
1/136
Next page
5
NOTE:
Only Matrix Fitness service or certied assembly
personnel can assemble this equipment.
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level at surface. It is recommended that you place a protective
covering on your oor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts
and bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly
and usage. Please do not wipe this off. If you have diculty,
a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that
special attention must be paid. It is very important to follow
the assembly instructions correctly and to make sure all parts
are rmly tightened. If the assembly instructions are not
followed correctly, the equipment could have parts that are not
tightened and will seem loose and may cause irritating noises.
To prevent damage to the equipment, the assembly instructions
must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing
parts, contact Customer Tech Support. Contact
information is located on the information card.
ASSEMBLY
TOOLS REQUIRED:
F 4 mm Allen Wrench
F 6 mm Allen Wrench
F Pedal Wrench (15mm)
F Phillips Screwdriver
PARTS INCLUDED:
F 1 Main Frame
F 1 Rear Stabilizer Tube
F 1 Front Stabilizer Tube
F 1 Rear Frame Handle
F 1 Rear Frame Cover
F 1 Console Mast
F 1 Console Handlebars
F 1 Front Shroud Cover
F 1 Seat Assembly
F 1 Air Cylinder (for seat assembly)
F 1 Seat Base
F 1 Seat Back
F 2 Pedals
F 1 Hardware Kit
Console sold separately
ENGLISH
NOTE:
1. This equipment is designed as an auxiliary device to
assist medical personnel to improve their patients’
health.
2. This equipment is designed for uses in cardiovascular,
physical rehabilitations and recoveries under medical
personnel’s instructions and monitoring.
3. This equipment conforms to IEC60601-1-2 and its
classication is Class 2a.
4. The waterproof level of this equipment is IPXO.
5. This equipment has no sterilization.
6. This equipment is not suitable for uses in Oxygen rich
environments.
7. This equipment is designed for continous operation.
8. This equipment complies with WEEE directives for
disposal and recycling.
9. Ambient temperature for operating this equipment is
5°C - 40°C (with NO air-ow), nominal 25°C.
10. Relative Humidity for operating this equipment is 10% -
90% (non-condensing), nominal 40% (non-condensing).
11. Ambient temperature for shipping and storage this
equipment is from -20°C to 70°C (with NO air-ow).
12. WARNING: Do not modify this equipment without
authorization of the manufacturer.
13. Paramedics and medics are the users. Users are
trained to operate the device, R3xm, according to the
instructions.
14. The user sets workout program and directs Patient to
exercise.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix R3XM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix R3XM in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 30,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Matrix R3XM

Matrix R3XM User Manual - English, German, Dutch, French, Italian, Polish, Portuguese, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info