738347
8
Zoom out
Zoom in
Previous page
1/102
Next page
8
0.6 m
(2 ft)
0.6 m
(2 ft)
0.6 m
(2 ft)
2 m (79”)
0.3 m (1 ft)
LEVELING THE EQUIPMENT
Install equipment on a stable and level floor. It is
extremely important that the levelers are correctly
adjusted for proper operation. Turn leveling foot
clockwise to lower and counter-clockwise to raise unit.
Adjust each side as needed until the equipment is
level. An unbalanced unit may cause belt misalignment
or other issues. Use of a level is recommended.
WARNING!
Our equipment is heavy, use care and additional help if necessary when moving. Failure to follow these instructions could result in injury.
LOCATION OF THE UNIT
Ensure that there is a clear zone behind the treadmill that is at least the width of the treadmill and at least 2 meters (at
least 79”) long. This clear zone is important to reduce the risk of serious injury were a user to fall o the back edge of
the treadmill. This zone must be clear of any obstruction and provide the user a clear exit path from the machine.
For ease of access, there should be an accessible space on both sides of the treadmill of at least 24” (0.6 meters) to allow a
user access to the treadmill from either side. Do not place the treadmill in any area that will block any vent or air openings.
Locate the equipment away from direct sunlight. The intense UV light can cause discoloration on the plastics. Locate the
equipment in an area with cool temperatures and low humidity. The treadmill should not be located outdoors, near water,
or in any environment that is not temperature and humidity controlled (such as in a garage, covered patio, etc.).
BEFORE YOU BEGIN
ENGLISH
fREE AREA
tRAINING AREA
SERVICE CASTER
The Performance Plus (optional Performance) has built-in caster wheels located near the end caps. To unlock the
caster wheels, use the provided 10mm Allen wrench (located in the cable wrap holder under the front cover). If you
need extra clearance when moving the treadmill, the rear levelers must be raised all the way up into the frame.
IMPORTANT:
Once the treadmill is moved into position, use the Allen wrench to rotate the caster bolt
into the locked position to prevent the treadmill from moving during use.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix Performance Plus Treadmill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix Performance Plus Treadmill in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 21,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Matrix Performance Plus Treadmill

Matrix Performance Plus Treadmill User Manual - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info