738346

Matrix Performance Cycle Upright Manual

12
Zoom out
Zoom in
Previous page
1/13
Next page
2
3
ENGLISH
CONSOLE GUIDE
Before proceeding, find the serial numbers located on barcode stickers and enter them in the spaces provided below. Use the information below when calling for service.
FRAME SERIAL NUMBER (Located on front lower frame)
FRAME
TREADMILL
F LIFESTYLE
F ENDURANCE
F PERFORMANCE
F PERFORMANCE PLUS
ASCENT TRAINER
F LIFESTYLE
F PERFORMANCE
SUSPENSION ELLIPTICAL
F LIFESTYLE
F ENDURANCE
F PERFORMANCE
RECUMBENT CYCLE
F LIFESTYLE
F ENDURANCE
F PERFORMANCE
UPRIGHT CYCLE
F LIFESTYLE
F ENDURANCE
F PERFORMANCE
HYBRID CYCLE F PERFORMANCE
CLIMBMILL
F LIFESTYLE
F ENDURANCE
F PERFORMANCE
STEPPER F ENDURANCE
CONSOLE SERIAL NUMBER (Located on back of the console)
CONSOLE
F LED
F GROUP TRAINING LED
F PREMIUM LED
F TOUCH
F TOUCH XL
4
LED CONSOLE DESCRIPTION
The Matrix machine is inspected before it is packaged. Carefully unpack the unit and dispose of the box
material. Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be
removed before use.
A) WORKOUT KEYS: Simple program view and selection buttons. Press Fitness Test button to cycle
through available tests.
B) GO: One Touch Start.
C) PAUSE: Pauses workout. Pause duration can be set in manager or engineering mode.
D) STOP: Ends workout and shows workout summary data.
E) INCLINE/LEVEL: Adjust level (incline for treadmills and ascent trainers) and make program
selections.
F) SPEED/LEVEL: Adjust level (speed for treadmills) and make program selections.
G) NUMBER KEYPAD: Workout data input for workout setup. Level or speed adjustment during workout.
H) ENTER: To confirm each program setting.
I) TIME TOGGLE: Cycles between time remaining, time elapsed, total time and clock.
J) TOGGLE DISPLAY: Cycles between 4 rows of workout information displayed in LED window. The
console will automatically cycle between the workout information if the Toggle Display button is
pushed and held down for 3 seconds.
K) READING RACK: Holds reading material or electronic device.
L) USB 2.0 PORT: Access for charging devices and for software updates.
M) OPTIONAL ENTERTAINMENT OVERLAY: For use with optional add-on TV.
N) HEADPHONE JACK: For use with optional add-on TV.
O) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode. Press a button to wake up the
machine.
P) RFID SENSOR: Wireless login access location (optional add-on feature).*
* Supported standards with carrier frequency of 13.56 MHz include; ISO 14443 A, ISO 15693, ISO
14443 B, Sony Felica, Inside Contact-less (HID iClass), and LEGIC RF.
LED
B
A
ENGLISH
M
C D G H FOE
H
J
I
P
L N
K
Treadmills Ascents / Ellipticals / Bikes ClimbMills / Steppers
Incline Level Steps
Distance Distance Distance
Heart Rate Heart Rate Heart Rate
METs METs METs
Speed Speed Speed/Level
Calories Calories Calories
Pace RPM Steps/Min
Watts Watts Watts
WORKOUTS
Manual
Training Workouts
Heart Rate
Rolling Hills
Fat Burn
Fitness Tests
5
group
training
LED
ENGLISH
 
 


 
 
GROUP TRAINING LED CONSOLE DESCRIPTION
The Matrix machine is inspected before it is packaged. Carefully unpack the unit and dispose of the box
material. Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be
removed before use.
The GROUP TRAINING LED console is specifically designed for Group Training settings, with one touch
speed and incline controls for members to follow coaching and make easy changes on the fly.
A) GO: One Touch Start.
B) PAUSE: Pauses workout. Pause duration can be set in manager or engineering mode.
C) STOP: Ends workout and shows workout summary data.
D) INCLINE/LEVEL: Adjust incline and make program selections.
E) SPEED/LEVEL: Adjust speed and make program selections.
F) NUMBER KEYPAD: Workout data input for workout setup. Level or speed adjustment during workout.
G) ENTER: To confirm each program setting.
H) INTENSITY BUTTONS:
Pre-workout - Press to customize your low/medium/high intensity presets.
During workout - Press to automatically adjust speed to your presets.
Note: Default speed/incline presets will be used if not customized pre-workout.
I) INCLINE QUICK KEYS: Adjust incline during workout.
J) SPEED QUICK KEYS: Adjust speed during workout.
K) READING RACK: Holds reading material or electronic device.
L) USB 2.0 PORT: Access for charging devices and for software updates.
M) OPTIONAL ENTERTAINMENT OVERLAY: For use with optional add-on TV.
N) HEADPHONE JACK: For use with optional add-on TV.
O) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode. Press a button to wake up the
machine.
P) RFID SENSOR: Wireless login access location (optional add-on feature).*
* Supported standards with carrier frequency of 13.56 MHz include; ISO 14443 A, ISO 15693, ISO
14443 B, Sony Felica, Inside Contact-less (HID iClass), and LEGIC RF.
NOTE: To access manager mode on the GROUP TRAINING LED console, press and hold the ‘1’
buttons for speed and incline for 4 seconds.
AB C F G EOD
H
I
P
L
N
J
K
M
6
premium
LED
ENGLISH
PREMIUM LED CONSOLE DESCRIPTION
The Matrix machine is inspected before it is packaged. Carefully unpack the unit and dispose of the box
material. Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be
removed before use.
The PREMIUM LED has a fully integrated ATM-style interface. All information required for workouts is
explained on-screen. Exploration of the interface is highly encouraged.
A) GO: One Touch Start.
B) PAUSE: Pauses workout. Pause duration can be set in manager or engineering mode.
C) STOP: Ends workout and shows workout summary data.
D) INCLINE/LEVEL: Adjust level (incline for treadmills and ascent trainers) and make program
selections.
E) SPEED/LEVEL: Adjust level (speed for treadmills) and make program selections.
F) NUMBER KEYPAD: Workout data input for workout setup. Level or speed adjustment during workout.
G) ENTER: To confirm each program setting.
H) FAN: Allows for fan speed selection (fan has three operating speeds).
I) DISPLAY KEYS: This console functions like an ATM machine with 8 function keys surrounding the
display. To make a selection or modify display data, press the key next to the item you wish to select
or modify.
J) READING RACK: Holds reading material or electronic device.
K) USB 2.0 PORT: Access for charging devices and for software updates.
L) OPTIONAL ENTERTAINMENT OVERLAY: For use with optional add-on TV.
M) HEADPHONE JACK: For use with optional add-on TV.
N) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode. Press a button to wake up the
machine.
O) RFID SENSOR: Wireless login access location (optional add-on feature).*
* Supported standards with carrier frequency of 13.56 MHz include; ISO 14443 A, ISO 15693, ISO
14443 B, Sony Felica, Inside Contact-less (HID iClass), and LEGIC RF.
A
L
B C F G END
H
I
O
K M
J
7
TOUCH
ENGLISH
TOUCH CONSOLE DESCRIPTION
The Matrix machine is inspected before it is packaged. Carefully unpack the unit and dispose of the box
material. Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be
removed before use.
The TOUCH has a fully integrated touch screen display. All information required for workouts is explained
on-screen. Exploration of the interface is highly encouraged. The information explaining how to program for
various workouts will give an explanation about the contents of each screen on the TOUCH.
A) GO: One Touch Start.
B) PAUSE: Displayed on-screen during workout. Pauses workout. Pause duration can be set in manager
or engineering mode. Press stop to end workout and show workout summary data.
C) READING RACK: Holds reading material or electronic device.
D) WIRELESS CHARGING: Wirelessly charges Qi enabled devices. Place phone/device securely in the
center of the reading rack so the device’s wireless power receiver (located in the phone/device and
varies by manufacturer) is in the center of the console’s wireless power transmitter .
NOTE: Anything between the back of the phone/device and the charger may reduce
performance and/or cause damage. Metal and magnetic objects (E.g. cases, identity and credit cards,
and key fobs) should be removed prior to charging.
E) USB 2.0 PORT: Device charging (output rating 5V /2A), device media, and software updates.
F) HEADPHONE JACK: Outputs audio from console to connected 3.5mm headphones.
G) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode.
H) MOTION SENSOR: Wave your hand over the sensor to wake the console.
I) RFID SENSOR: Wireless login access location.
* Supported standards with carrier frequency of 13.56 MHz include; ISO 14443 A, ISO 15693, ISO
14443 B, Sony Felica, Inside Contact-less (HID iClass), and LEGIC RF.
E
C
G
I
D
A
FH
8
TOUCH XL CONSOLE DESCRIPTION
The Matrix machine is inspected before it is packaged. Carefully unpack the unit
and dispose of the box material. Note: There is a thin protective sheet of clear
plastic on the overlay of the console that should be removed before use.
The TOUCH XL has a fully integrated touch screen display. All information
required for workouts is explained on-screen. Exploration of the interface is highly
encouraged. The information explaining how to program for various workouts
will give an explanation about the contents of each screen on the TOUCH XL.
A) GO: One Touch Start.
B) PAUSE: Displayed on-screen during workout. Pauses workout. Pause duration can be
set in manager or engineering mode. Press stop to end workout and show workout
summary data.
C) READING RACK: Holds reading material or electronic device.
D) WIRELESS CHARGING: Wirelessly charges Qi enabled devices. Place phone/device
securely in the center of the reading rack so the device’s wireless power receiver
(located in the phone/device and varies by manufacturer) is in the center of the
console’s wireless power transmitter .
NOTE: Anything between the back of the phone/device and the charger may
reduce performance and/or cause damage. Metal and magnetic objects (E.g. cases,
identity and credit cards, and key fobs) should be removed prior to charging.
E) USB 2.0 PORT: Device charging (output rating 5V /2A), device media, and software
updates.
F) HEADPHONE JACK: Outputs audio from console to connected 3.5mm headphones.
G) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode.
H) MOTION SENSOR: Wave your hand over the sensor to wake the console.
I) RFID SENSOR: Wireless login access location.
* Supported standards with carrier frequency of 13.56 MHz include; ISO 14443 A, ISO
15693, ISO 14443 B, Sony Felica, Inside Contact-less (HID iClass), and LEGIC RF.
TOUCH
XL
ENGLISH
E
C
G
I
D
A
FH
12
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
• Consult the dealer or an experienced radio/TV technician for help. 
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. 
FCC RF Radiation Exposure Statement: 
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body
ENGLISH
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix Performance Cycle Upright at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix Performance Cycle Upright in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Matrix Performance Cycle Upright

Matrix Performance Cycle Upright User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info