738374
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
Installation
The installation of this appliance must be carried out by a
suitably qualified person.
If the oven is being installed into a built under oven housing unit
ensure that the front rail at the top of the unit is not installed as it could
restrict ventilation.
Ensure that air can flow freely around the housing area. If the oven
is being installed into a fully enclosed built-under oven housing unit
it may be necessary to cut a small slot in the top of the plinth fitted
under the unit. Cut a section 400mm wide
and a minimum of 15mm high to allow air
to pass under the unit. Alternatively cut
a section 400 x 450mm in the base of the
carcass as indicated.
Failure to allow adequate ventilation to
the appliance may result in overheating
or damage to adjacent units and could
invalidate the warranty.
This appliance is type X installation.
The walls of the kitchen units must be able to withstand
temperatures of 100°C +.
When correctly installed ensure that there is a gap of 4mm
minimum between the sides of the oven and adjacent furniture
doors.
How to install your oven
You will need the housing area in fig. 10 to fit your oven correctly.
fig. 9
400
450
600
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix MS200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix MS200 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info