738369
25
Zoom out
Zoom in
Previous page
1/32
Next page
25
Gas Supply Requirements
IMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A GAS SAFE
REGISTERED FITTER OR OTHER SUITABLY QUALIFIED PERSON.
This installation must comply with the Gas Safety (installation and
use) Regulations 1984.
This appliance is category II2H3+ and is designed for use in the
UK and Ireland. The installation must comply with the Gas Safety
(installation and use) Regulations 1984.
The CDA Group Ltd is not legally able to provide any assistance
in the installation of gas appliances except to Gas Safe registered
installers. Any Gas Safe registered fitter requiring help must provide
their name, address and registration number. Information supplied
will be validated before help is provided.
This appliance is suitable for conversion to Liquid Petroleum Gas
(G30 Butane at a pressure of 28-30mbar or G31 Propane at a
pressure of 37mbar). A kit is provided. Do not attempt to fit the
conversion kit yourself.
This appliance is adjusted for natural gas (G20) at 20mbar only.
In the event that this appliance is not installed in accordance
with the above requirements, the appliance may be disconnected
from the mains gas supply until any faults are rectified; this is a legal
requirement.
This appliance must not be connected to a combustion gas
recovery scavenging system.
The connection to the gas supply must comply with all current
regulations in force.
An isolation tap should be provided which must be accessible
after installation.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix MR111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix MR111 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info