738369
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
Igniting the burners
The hob is fitted with a flame failure device. Flame failure devices
operate by shutting off the supply of gas to the burner in the event
that the flame is extinguished accidentally.
To ignite the burners, follow these
instructions:
1. Lightly press the control knob down
and turn the knob anticlockwise to
the maximum position. Firmly press and
hold down the control knob to begin the ignition process (a clicking
sound will be heard). Hold down the control knob for a few
seconds after ignition to allow the safety device to detect that the
burner is lit.
2. Once the burner is lit, adjust the burner power to the required
position.
Please note:
The ignition device should not be operated for more than
15 seconds.
If a burner does not ignite, or turns off accidentally, turn the
control knob to the ‘off’ position, and wait for one minute before
attempting to reignite the burner.
If the burner does not ignite, repeat the ignition process with the
burner at the minimum position.
Fig.3
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix MR111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix MR111 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info