738379
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
Gas burners
Gas flow to the burners is controlled by the control knobs (5,6,7 and
8 on Fig.1). There are 3 positions shown on the control panel (Fig.2).
Turning the control knob to the positions shown below achieves the
following:
Closed (switches gas valve and burner off)
Maximum position (highest heat level) & ignition position
Minimum position (lowest heat level)
The knobs should always be turned in an anticlockwise direction from
the closed/off position. Attempting to ignite the burner in a clockwise
direction from the closed position may cause damage to the hob.
Igniting the gas burners
This hob’s burners are fitted with flame failure devices. These operate
by shutting off the gas supply to the burner in the event that the flame
is extinguished whilst the control knob is in an open position.
To ignite the burners
Press the control knob down and turn the knob anticlockwise to the
maximum position (Fig. 3). Hold the control knob down to begin the
ignition process (a constant clicking should be heard). Once the flame
appears around the burner, keep the control knob pressed down for
a few seconds to allow the flame failure device to detect
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix MHG101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix MHG101 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info