738377
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
Auto-heat Function
All zones are equipped with an auto-heat function, which reduces
the warming up time for the zone. Each power level has a limited time
for which the auto-heat function can be used. A table showing these
times is shown at the bottom of this page.
To activate the auto-heat function on a zone
Switch the desired zone on, if not already so, by touching the
relevant cooking zone "On/off sensor" (1) . Next, touch the minus
setting selector (5) to set the power level to 9. Then, touch the plus
setting selector (4) and the cooking zone indicator should alternate
between 9 and the letter 'A'. Finally, press and hold the minus
setting selector (5) to set the desired auto-heat power level.
Please note: You can use the plus setting selector (4) to adjust the
power level if you go too low but pressing the minus setting selector
a second time will cancel the auto-heat function and you will have to
start again.
To deactivate the auto-heat function
Simply touch the desired zone's "On/off sensor" (1) (if zone control
is not already active) followed by the minus setting selector (5). The
display will return the preset power level.
1.11
1
Zone Power Level
Maximum
Operating Time
(minutes)
2
3
4 5 6 7
8 9
2.44 4.47 5.28 6.29 1.11 2.44 2.44 - -
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix MHC201FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix MHC201FR in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info