738376
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
Troubleshooting
Problem Possible Causes Possible Remedy
The appliance does not
work and no indicators
are lit.
The appliance has no
power.
Check the RCD, hob
power supply and fuse
and replace fuse if
The appliance switches
itself o.
There is an issue with the
installation or the internal
wiring of the hob.
The RCD has tripped.
Contact your installer if
appliance is new.
Check if tripped, and
reset RCD if necessary.
Should the above steps not resolve an issue, please contact CDA
Customer Care for assistance. Contact details are on page 11.
IMPORTANT - PLEASE NOTE: In the event of any breakage, crack
or cracking – even minimal – of the vitroceramic glass, immediately
disconnect your appliance to prevent a risk of electric shock and
contact CDA Customer Care.
Residual heat indicator
has extinguished despite
zone(s) still being hot.
The appliance has no
power.
The temperature of
the zone is below the
acceptable threshold
(approximately 50°C).
Check the fuse and
replace if blown.
Avoid touching the
ceramic surface directly
for some time after use.
Hob top is broken,
cracked and/or chipped.
Stop using the appliance immediately and switch
the appliance o at the mains. Contact CDA
Customer Care to arrange a repair (contact details
on page 11).
A fault has not been
resolved by any
suggested remedies.
Contact CDA Customer Care using the contact
details on page 11 to arrange a service visit.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix MHC101FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix MHC101FR in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info