738394
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
Take care not to use the hair dryer too close to the appliance, which
could damage the seal. A distance of approximately 10cm should be
adequate. When completed, allow the seal and door to cool before
touching them. Once done, the seal should remain in position.
Reversing the icebox door
Remove the lower hinge piece (circled in Fig. 11) by removing the two
screws holding it in place. The door will begin to drop once this has
been removed so
take care. Place the
door somewhere
safe and remove
the lower hinge
piece. Carefully
take out the white
cover caps from the
opposite side. Place these in the old hinge position holes.
Remove the door latch strike plate (Fig. 12) and mirror its position on the
opposite side.
Re-fit the door in the new position,
ensuring that the upper hinge pivot on
the door goes into the recess in the top
of the fridge. Latch the door over the
strike plate and fit the lower hinge piece
in its new position. Test that the icebox
door functions properly and make any necessary adjustments.
Fig. 11
Cover caps
Fig. 12
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix MFU251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix MFU251 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info