738333

Matrix Lifestyle ClimbMill Manual

10
Zoom out
Zoom in
Previous page
1/91
Next page
10
MAINTENANCE SCHEDULE
ACTION FREQUENCY
Clean and inspect the ClimbMill:
• Turn o the machine with the ON/OFF switch, then unplug the power cord at the
wall outlet.
• Clean entire machine using water and a mild soap applied to a soft cloth. Never
use solvents, as they can cause damage to the ClimbMill. Never spray cleaner
directly onto the machine or console.
• Inspect the power cord. If the power cord is damaged.
• Make sure the power cord is not underneath the machine or in any other area
where it can become pinched or cut during storage or use.
• If any labels are damaged or illegible.
BEFORE EACH USE
Clean underneath the machine:
• Turn o the machine with the ON/OFF switch, then unplug the power cord at the
wall outlet.
• Remove the service cover from the front of the machine by the 2 screws and
wipe or vacuum any grease, dust particles or other objects that may have
accumulated on any surface. Return the service cover to its previous position.
• Wipe or vacuum any dust particles or other objects that may have accumulated
around the machine.
WEEKLY
Unplug the ClimbMill and clean the AUTO STOP SENSORS (located under the
bottom step).
WEEKLY
IMPORTANT!
• Turn o the machine with the ON/OFF switch, then unplug the power cord at the
wall outlet. Wait 60 seconds.
• Inspect all assembly bolts of the machine for proper tightness. Reference
assembly steps for proper tension of each bolt.
• Remove the front access cover. Wait until ALL LED lights turn o.
• Clean the area to eliminate any lint or dust particles that may have accumulated.
Failure to do so may result in premature failure of key electrical components.
• Check step motion by rotating the steps backwards to ensure free movement.
• Check stability to ensure the ClimbMill does not rock or wobble. Adjust levelers
as necessary.
MONTHLY
MAINTENANCE
Preventative maintenance is the key to smooth operating
equipment, as well as keeping the users’ liability to a minimum.
Equipment needs to be inspected at regular intervals. Defective
components must be replaced immediately. Improperly
working equipment must be kept out of use until it is repaired.
Ensure that any person(s) making adjustments or performing
maintenance or repair of any kind is qualified to do so.
MAINTAIN LABELS AND NAMEPLATES: Do not remove
labels for any reason. They contain important information.
WARNING
Disconnect all power before servicing or moving the equipment.
To remove power from the ClimbMill, the power cord must be
disconnected from the wall outlet. To clean, wipe surfaces down
with soap and slightly damp cloth only; never use solvents.
AUTO STOP SENSORS
ENGLISH
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix Lifestyle ClimbMill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix Lifestyle ClimbMill in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 28,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Matrix Lifestyle ClimbMill

Matrix Lifestyle ClimbMill User Manual - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info