664303
9
Zoom out
Zoom in
Previous page
1/102
Next page
9
EMERGENCY STOP
LEVER (ALL MODELS)
AUTO STOP SENSOR
(ALL MODELS)
CONTROL ZONE
(C5X, C7XE, C7XI)
PROPER USAGE
MOUNTING THE CLIMBMILL
1. Stand directly behind the ClimbMill. Grasp either the upper or lower handle
bars and step onto the ClimbMill until you are within comfortable reach of
the console, emergency stop lever, and remote handlebar controls.
2. There are two emergency stop buttons the ClimbMill. An emergency stop
lever is located on the console mast below the display, and an emergency
stop button is located on the lower right side handlebar.
3. The CONTROL ZONE will bring the step surfaces to a complete stop upon
detecting an object. The AUTO STOP SENSOR will bring the step surfaces to
a complete stop upon detecting an object under the bottom step.
4. To determine proper workout position, stand on the steps within comfortable
reach of the console. Maintain a constant distance from the console and
remote handlebar controls. Keep your knees slightly bent at all times.
CLIMBMILL SPM (STEPS PER MINUTE)
LEVEL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
SPM 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 143 148 153 158 162
POWER
The power must be plugged into the power jack,
which is located in the front of the equipment
near the stabilizer tube. The power switch is
located next to the power jack. Make sure it is in
the ON position. Unplug cord when not in use.
WARNING!
Never operate equipment if it has a damaged cord
or plug, if it is not working properly, if it has been
damaged, or immersed in water. Contact Customer
Tech Support for examination and repair.
LEVELING THE EQUIPMENT
Locate a level, stable surface to position the equipment. The equipment has levelers located
below the bottom step. To access the levelers, remove the end caps (C3x, C3xe) or CONTROL
ZONE (C5x, C7xe and C7xi). CAUTION: There is an electrical plug located under the CONTROL
ZONE and will need to be unplugged before the cover can be completely removed. Use
an allen wrench to level the unit. Once stable, replace parts as they were removed.
A carpenter’s level is recommended.
NOTE: There are only two levelers on the equipment.
WARNING!
Our equipment is heavy, use care and additional help if necessary when
moving. Failure to follow these instructions could result in injury.
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix C3x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix C3x in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 21,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Matrix C3x

Matrix C3x User Manual - English - 68 pages

Matrix C3x User Manual - English - 12 pages

Matrix C3x User Manual - German, Dutch, French, Italian, Polish, Portuguese, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info