Manual Mastervolt Solar ChargeMaster SCM20 PWM (page 13 of 16) (English)

785623

Zoom out

Zoom in

1/16

EN / SCM20 & SCM40 PWM User’s Manual 13

3.8 COMMISSIONING AFTER INSTALLATION

CAUTION!

Check the polarity of all wiring before

commissioning: positive connected to positive

(red cables), negative connected to negative

(black cables).

1 If all wiring is OK, place the DC-fuse between the Solar

Chargemaster and the battery

WARNING

When placing this fuse, a spark can occur,

caused by the capacitors used in the Solar

Chargemaster. This is particularly dangerous in

places with insufficient ventilation, due to the

gassing of the batteries an explosion can occur.

Avoid having flammable materials close by.

2 Then. place the DC-fuse between the Solar

Chargemaster and the load.

3 The Solar Chargemaster will initiate the charging

process if the voltage from the PV array is sufficient.

If the Solar Chargemaster does not switch on,

press MENU shortly.

4 Refer to section 2.6 for settings.

3.9 DECOMMISSIONING

To put the Solar ChargeMaster out of operation, follow

these instructions in order of succession:

1 Switch off all loads that are connected to the Solar

Chargemaster;

2 Disconnect the PV array by switching off the switch

between the PV-array and the Solar Chargemaster (or

protect the PV-array from light exposure, e.g. by

covering the PV modules);

3 Remove the DC-fuse between the Solar Chargemaster

and the battery;

4 Remove the DC-fuse between the Solar Chargemaster

and the load;

5 Check with a suitable voltage meter whether the

Battery connection and the LOAD output of the Solar

Chargemaster are voltage free;

6 Disconnect the negative cable to the PV array from the

terminal block of the Solar Chargemaster. Isolate the

core of the wire with insulating tape;

7 Do the same for the positive cable to the PV array;

8 Disconnect all other remaining wiring.

Now the Solar Chargemaster can be demounted in a safe

way.

3.10 STORAGE AND TRANSPORTATION

When not installed, store the Solar Chargemaster in the

original packing, in a dry and dust free environment.

Always use the original packing for transportation. Contact

your local Mastervolt Service Centre for further details if

you want to return the apparatus for repair.

3.11 RE-INSTALLATION

To reinstall the Solar Chargemaster, follow the instructions

as described in this chapter (chapter 3).

3.12 CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electronic Equipment)

This product is designed and manufactured

with high quality materials and components,

which can be recycled and reused. When

this crossed-out wheeled bin symbol is

attached to a product, it means the product is

covered by the European Directive 2012/19/EU.

Please be informed about the local separate collection

system for electrical and electronic products.

Please act according to your local rules and do not dispose

of your old products with your normal household waste.

The correct disposal of your old product will help prevent

potential negative consequences to the environment and

human health

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Solar ChargeMaster SCM20 PWM in the language / languages: English as an attachment in your email.

The manual is 0.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastervolt Solar ChargeMaster SCM20 PWM Manual

Product: