785686
33
Zoom out
Zoom in
Previous page
1/36
Next page
PROBLEMEN OPLOSSEN
NL / Masterlink BTM-III / Mei 2008
69
Probleem Mogelijke oorzaak Wat te doen?
Berekende waarde van het
laadrendement (CEF) is te
laag
De geïnstalleerde accu’s zijn
nieuw
Niets (wacht 5-10 cycli). Bij nieuw geïnstalleerde
accu’s zal het rendement gedurende de eerste 5-
10 cycli nog toenemen
De accu’s zijn gedurende
langere tijd niet gebruikt.
Laad de accu’s volledig tot 100%.
Accu’s zijn volledig
geladen, maar
ladingstoestand (SOC)
geeft geen “100%” aan
Laadsysteem heeft nog niet
voldaan aan de voorwaarden
waarbij de accu als volledig
geladen wordt beschouwd.
Zie hoofdstuk 11.4 voor een overzicht van de
voorwaarden waarbij de accu als volledig geladen
wordt beschouwd.
Na langdurig laden geeft
de ladingstoestand (SOC)
nog steeds geen “100%”
aan.
Foutieve instelling van de float-
spanning
Verlaag bij de Masterlink BTM III de instelling van
de float-spanning met 0.1V. Zie paragraaf 10.8
Verkeerde accunaam
wordt weergegeven
Fout in de instellingen Zie hoofdstuk 5.2 om 9.1 de naam van de
accubank te wijzigen.
Verkeerde taal wordt
weergegeven
Foutieve instelling van de taal Zie paragraaf 5.1 of 10.2 om de juiste taal in te
stellen.
Het lukt niet om een
andere taal in te stellen
doordat ik de getoonde taal
niet begrijp.
Foutieve instelling van de taal
(gebruiker begrijpt de
weergegeven taal niet)
Schakel de DC voedingsspanning van de
Masterlink BTM III uit, en schakel deze daarna
weer in. De Masterlink BTM III zal dan de Engelse
taal weergeven. Volg daarna de stappen zoals
beschreven in paragraaf 5.1.
Wijzigen van variabelen in
het instellingen-menu is
niet mogelijk
Telkens wanneer u het
instellingen-menu verlaat
wordt de toetsblokkade actief.
Schakel de toetsblokkade uit (zie hoofdstuk 10.1).
Displayverlichting en LED-
balk schakelen na 60
seconden uit.
Spaarstand is ingeschakeld Druk op een toets of raadpleeg hoofdstuk 10.3 om
de spaarstand uit te schakelen.
Displayverlichting en LED-
balk schakelen na 60
seconden niet uit terwijl
spaarstand ingeschakeld is
Instelling van de spaarstand
wordt genegeerd indien de
naam van de accubank
ingesteld staat op
“DASHBOARD VERL”
Wijzig de naam van accubank 3. Zie paragraaf
9.1.
Alarmfunctie werkt niet
(correct)
Foutieve instelling van de
instelpunt
Zie paragraaf 9.7 t/m 9.13 voor de juiste instelling
van de parameters.
Alarmfunctie staat uit Zet de alarmfunctie op AAN (paragraaf 9.6).
Relaiscontacten verkeerd
aangesloten
Sluit de contacten van het relais op de juiste wijze
aan (paragraaf 4.2, stap 5).
Alarmfunctie reageert ten
onrechte op een
kortstondige spanningsval
Foutieve instelling van de
tijdsvertraging van de
alarmfunctie.
Vergroot de tijdsvertraging van de alarmfunctie
(zie paragraaf 9.9).
De alarmfunctie is nog
geactiveerd terwijl de
accu’s al weer volledig zijn
geladen
Minimale looptijd van de
alarmfunctie is nog niet bereikt
Zie paragraaf 9.12 om de minimale looptijd van de
alarmfunctie in te stellen.
MasterAdjust software
geeft foutmelding “no
devices found”
NMAE communicatie staat
ingesteld op AAN
Zet de NMAE communicatie UIT (zie paragraaf
10.19).
Geen PC-link aangesloten Raadpleeg de gebruikershandleiding van de PC-
link.
COM port van de PC wordt
gebruikt door andere software
Raadpleeg de gebruikershandleiding
MasterAdjust software.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Masterlink BTM-III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Masterlink BTM-III in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info