785589
3
Zoom out
Zoom in
Previous page
1/4
Next page
EN / MasterBus Power Interrupter / May 2015 3
3 INSTALLATION
3.1 Overview
Insert the MasterBus cables, see below.
Functional scheme of the MasterBus Power Interrupter.
3.2 Operation.
One (free choice) of the MasterBus connectors
should be connected to a MasterBus powering
device, like a MasterBus USB Interface or Mass
Charger, with a MasterBus cable.
The other MasterBus connector should be
connected to a non-powering device like a
MasterView Easy display. You will then be able to
disconnect the MasterView Easy display from
MasterBus power. Every non-powering MasterBus
device will be disconnected from MasterBus power
attached to this connection.
The default start-up configuration is “On”. This
means that MasterBus Power is available (switched
on) in a start-up situation. This setting can be
changed to “Off” or “Last” in the configuration page
of MasterBus. Use “Last” if you want the MasterBus
Power Interrupter to remember the last state in a
start-up situation.
The MasterBus Power Interrupter can be used to
make a segregation between powering and non-
powering devices on a MasterBus network. By doing
so, you can manually switch the MasterBus Power
off by changing the device state to standby using the
control button in the monitoring page of MasterBus.
Events are available to change the device state
automatically. MasterBus Power (non-powering
devices) can be switched off (Standby) when, for
instance, a low battery situation is detected in a
MasterShunt or Mass Combi.
1. Communication LED, illuminating when
the state is “Activated”
MasterBus connector
Function:
“Standby”: Relay is open Switched off
MasterBus Power.
“Activated”: Relay is closed Switched
on Masterbus Power.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt MasterBus Power Interrupter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt MasterBus Power Interrupter in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info