Manual Mastervolt MasterBus Philippi Interface (page 5 of 8) (English)

785593

Zoom out

Zoom in

1/8

EN / MasterBus – Philippi Interface 5

Mass Combi (Ultra)

The following models can be monitored on the

PSM2 display:

 Mass Combi Ultra 12/3000 (38013000)

 Mass Combi Ultra 24/3500 (38023500)

 Mass Combi Ultra 48/3500 (38043500)

 Mass Combi Pro 12/3000 (38513000)

 Mass Combi Pro 24/3500 (38523500)

 Mass Combi via Serial interface (77030450)

 Mass Combi via Combi interface (77030475)

The following information can be monitored on the

PSM2 display:

 Battery voltage

 Battery charge current

 Mains input voltage

 Mains input current

 AC output 1 voltage

 AC output 1 current

 Generator input voltage (if applicable)

 Generator input current (if applicable)

 AC output 2 voltage

 AC output 2 current

The following configuration items can be set from

the PSM2 display:

 Set mains fuse

 Silent mode power %(if applicable)

 Charge method main battery

 Maximum charge main battery

 Battery type of main battery

 Charge method secondary battery (if applicable)

 Maximum charge secondary battery (if

applicable)

 Battery type of secondary battery (if applicable)

 Inverter voltage (if applicable)

 Inverter frequency (if applicable)

 Ground relay On/Off (if applicable)

 Energy saving mode (if applicable)

 Input = Genset On/Off (if applicable)

 Input 1 policy (if applicable)

 Input 2 policy (if applicable)

MLi Battery

The following models can be monitored on the

PSM2 display:

 MLI Ultra 12/2500 (66012500)

 MLI Ultra 12/5000 (66015000)

 MLI Ultra 24/5000 (66025000)

The following information can be monitored on the

PSM2 display:

 Battery state of charge

 Battery time remaining

 Battery voltage

 Battery current

 Battery temperature

The following configuration items can be set from

the PSM2 display:

 Event battery low threshold

 Event battery pre low threshold

 Event battery full threshold

 Event battery over voltage threshold

 Switch MasterBus power On and Off

NOTE: the most often used settings of the Mass

Combi can be opened in the display by pressing the

middle square on the monitoring page of the Mass

Combi, see figure 1.

On the monitoring page of the Philippi interface you

find the most recent data which is ready for sending

to the PBus network. If your monitoring page shows

“- - -” for fields, it indicates that no requests have

been received for some time from the PBus network

and no data is prepared.

*) Might require software update

**) Changing these values might impact your system

warranty

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt MasterBus Philippi Interface in the language / languages: English as an attachment in your email.

The manual is 0.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mastervolt MasterBus Philippi Interface Manual

Product: