785592
6
Zoom out
Zoom in
Previous page
1/12
Next page
BEDIENING
18 Februari 2015 / MasterBus - Combi Interface / NL
Parameter Omschrijving Fabrieks-
instelling
Instelbereik
DC Alrm vertrag. Vertragingstijd inschakelen alarmfunctie bij onderspanning
(zie par. 3.6 van de gebruikershandleiding van de Mass
Combi)
30 sec 1-255 sec
Alle fouten Alarm functie wordt geactiveerd bij alle mogelijke fouten Uit Uit, Aan
Accuspanning Alarm functie wordt geactiveerd bij onderspanning of
onderspanning van de accu
Aan Uit, Aan
AC Output Alarm functie wordt geactiveerd bij te hoge of te lage AC
uitgangsspanning
Uit Uit, Aan
AC Last Alarm functie wordt geactiveerd bij overschrijding
“Lastniveau” (te hoge AC uitgangsstroom)
Uit Uit, Aan
Lastniveau Drempelwaarde voor “AC Last” 8.7A 0.1A-25.5A
Extra
Bulk ret. volt Accuspanning waarbij de lader terugschakelt naar Bulk 12.80/25.60/
51.20V
8-16.00/16-32.00/
32-64.00V
Return amps Omschakelpunt waarbij de lader omschakelt van Absorptie
naar Float
6.0A/3.6A/
1.8A
0.1A-25.5A
Omvormspanning AC uitgangsspanning van de omvormer 230V 180-250V
DIP-switches
Parallel mode DIP switch A1 + A2: Parallelbedrijf (alleen uitlezen)
Omvormfrequentie. DIP switch A3: Uitgangsfrequentie van de omvormer (alleen uitlezen)
Energiemode DIP switch A4 + A5: Spaarstand (alleen uitlezen)
Type accu DIP switch A6 + A7: Type accu (alleen uitlezen)
Aardrelais DIP switch A8: Ground relay (alleen uitlezen)
Power Sharing DIP switch B1 + B2 + B3: Power sharing functie (alleen uitlezen)
Power support DIP switch B4: Power Support functie (alleen uitlezen)
Netondersteun. DIP switch B5: Generator / mains support functie (alleen uitlezen)
Powerkwaliteit DIP switch B6: Aanpassen specificaties voor de externe stroomvoorziening (alleen uitlezen)
Equalize DIP switch B8: Equalize mode (vereffeningslading) (alleen uitlezen)
4.1.3 Events
Parameter Omschrijving Fabrieks-instelling Instelbereik
Events
Evt x bron Event-based command
Kies hier de gebeurtenis (event) van de Mass Combi die
zal moeten leiden tot ingrijpen op de werking van een
ander apparaat dat is aangesloten op het MasterBus
netwerk
Uitgeschakeld (Zie Overzicht van
event bronnen,
paragraaf 4.1.4)
Evt x doel Event-based command
Hier kiest u de naam van het op de MasterBus
aangesloten apparaat dat actie moet ondernemen naar
aanleiding van een event in de Mass Combi.
(See Device list)
Evt x commando Event-based command
Met het Event commando. bepaalt u welke parameter
van het Event doel gewijzigd moet worden
(Zie Overzicht van
event commando’s
in de handleiding
van het
geselecteerde
apparaat)
Evt x data Event-based command
Met Evt data kiest u wat er met de status van het Event
commando moet gebeuren
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt MasterBus Combi Interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt MasterBus Combi Interface in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info