785685
13
Zoom out
Zoom in
Previous page
1/27
Next page
EN / Mass Sine Ultra
13
Figure 4-5.2: Front lid removed
WARNING
The front panel is never to be removed while the
Mass Sine Ultra is still connected to a power
source!
4.6 Mounting the cabinet to a surface
M6 bolts can be used for the mounting of the cabinet
vertically to a surface, like shown on the front page of this
manual and figure 4-6.
Take the following steps to mount the cabinet:
1 Determine the four mounting spots on basis of the
outline drawings. 150 mm of free space is required
below the Mass Sine Ultra for installation and DIP
switch operation;
2 Screw the topmost bolts somewhat into the wall;
3 Hang the cabinet with its key holes over the two bolts
and screw these bolts finger tight, so shifting is still
possible;
4 Place the two lowermost bolts;
5 Fasten all bolts securely;
6 Fix cabinet to the surface with remaining two bolts.
4.7 Wiring instructions
WARNING
Have installation work done by a licensed
electrician only. Before connecting the wiring,
make the AC distribution as well as the DC
distribution voltage free. Move the main switch to
the “Off”-position.
CAUTION!
Short circuiting or reversing polarity may lead to
serious damage to the batteries, the Mass Sine
Ultra, the wiring and/or the terminal connections.
Fuses between the batteries and the Mass Sine
Ultra cannot prevent damage caused by reversed
polarity. The damage as a result of reverse
polarity is not covered by the warranty.
CAUTION!
Too-thin cables and/or loose connections can
cause dangerous overheating of the cables
and/or terminals. Therefore tighten all
connections well. Only use cables of the correct
size.
Figure 4-6: Mount the Mass Sine Ultra upright to a solid
surface that is part of the construction
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Mass Sine Ultra 24 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Mass Sine Ultra 24 4000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info