786832
33
Zoom out
Zoom in
Previous page
1/44
Next page
PROBLEMEN OPLOSSEN
NL / Mass Combi 12/1600-60; 12/2200-100; 24/1800-35; 24/2600-60 / Januari 2015 77
Bedrijf LED indicatie Uitleg / mogelijke oorzaak Wat te doen
Lader 2 = geel
8 = rood
Temperatuur compensatie (TC) fout. De
temperatuur van de accu is te hoog of
accutempratuursensor geeft een foute
waarde.
Haal de temperatuur sensor los en als de
indicator uitgaat vervang dan de sensor.
3 = geel
8 = rood
DC spanningsfout. De accuspanning is te
hoog of te laag.
Controleer de accu’s.
4 = geel
8 = rood
Kortsluiting. De accu spanning is veel te
laag. De lader regelt de uitgangsstroom
terug naar een kwart van de maximale
stroom.
Controleer de accu’s en de bedrading.
5 = geel
8 = rood
Oververhitting. Bij extreme oververhitting
zal de laadstroom worden teruggeregeld
naar 0A totdat de Mass Combi is
afgekoeld.
Controleer of de omgevingstemperatuur
niet te hoog is of dat de ventilatie van de
Mass Combi geblokkeerd is.
2,3,4,5,6 = geel
knipperend,
8,9 = groen
Equalizing mode (vereffeningslading) is
actief
Zie paragraaf 6.2.6
2 = geel knipperend
3,4,5,6 = geel
8,9 = groen
Lader doorloopt een compensatie-cyclus
voor zelfontlading van de accu’s
Niets, dit is geen fout. Zie afbeelding 36
voor laadkarakteristieken
omvormer 1 = geel
7 = rood
De omvormer is overbelast Verminder de belasting door een deel uit te
schakelen
3 = geel
7 = rood
DC spanningsfout. De accu spanning is
te laag of te hoog.
Controleer de accu’s en de bedrading.
4 = geel
7 = rood
De omvormer uitgangsspanning is lager
dan 180VAC.
Verminder de belasting door deze uit te
schakelen.
5 = geel
7 = rood
Oververhitting. Door een te hoge
temperatuur is de omvormer
uitgeschakeld.
Verminder de belasting door deze uit te
schakelen en wacht totdat de Mass Combi
is afgekoeld.
7 = rood knipperend De omvormer is uitgeschakeld en kan
alleen weer gestart worden met een
handmatige reset.
Haal alle apparatuur los of schakel ze uit
en herstart de Mass Combi met
“On/Off/Ch. –schakelaar door deze uit en
weer aan te zetten.
6 = geel knipperend
7 = groen
De accu spanning is te laag, maar de
omvormer is nog ingeschakeld
Controleer de accu’s en de bedrading.
Indien de accuspanning verder zakt, zal de
omvormer automatisch uitschakelen
3,4 5,6 = geel
7 = groen
2 = geel knipperend
De accu spanning is te hoog, maar de
omvormer is nog ingeschakeld
Controleer de DC-ingangsspanning Indien
de accuspanning verder stijgt, zal de
omvormer automatisch uitschakelen
Tabel 4: Foutcodes van de Mass Combi.
Als het niet mogelijk is om de fout aan de hand van bovenstaande tabel op te lossen, neem dan contact op met uw plaatselijke
Mastervolt Service Center. Zie www.mastervolt.com voor adressen. Houd de volgende informatie bij de hand als u contact
opneemt met uw plaatselijke Mastervolt Service Center om een probleem aan te melden:
Artikel- en serienummer (zie paragraaf 1.6)
Softwareversie (zie paragraaf 8.2)
Met deze informatie kan Mastervolt u een betere en snellere service bieden
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Mass Combi 12 2200-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Mass Combi 12 2200-100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info